Brand New 10'er / Never been rigged (Vacuum Bagged)

[RiverDave]

This is a pricey little deal here, but if you have the coin you won't find a nicer hull to start with on planet earth..

Fully Vaccum Bagged, bitchen little 10'er. One person can pick this hull up and carry it and it's strong enough that you could drop it off a building and nothing would happen to it.

Call Lee for a price.

RD

[Mondorally]

That sure would go good with the 24' they're rigging right now:rolleyes:

[RiverDave]

That sure would go good with the 24' they're rigging right now:rolleyes:

Justing I still think your nuts for wanting to offload your 27.

RD

[Community]

Dave, you still going to cut the bildge out of the 10 and 12 and do interior?

[SOCALCRICKETT]

If this one is a lighter hull, can it handle more than the 25-35 hp motors that the older 10's and 12's could handle?

[Riverbound]

If this one is a lighter hull, can it handle more than the 25-35 hp motors that the older 10's and 12's could handle?

My 10'er has a tohatsu 40

[SOCALCRICKETT]

Last time a spoke with Lee he said that the older Tohatsu 40 worked on the 10'ers because of their weight, other than that I don't know of any higher hp motors that are about the same wieght.

[RiverDave]

Dave, you still going to cut the bildge out of the 10 and 12 and do interior? I'm cutting the well out of them both and and making it flat non skid in that area.

If this one is a lighter hull, can it handle more than the 25-35 hp motors that the older 10's and 12's could handle?

I think these hulls can handle more then that. I had a 40 on mine and felt it could run quite a bit faster safely. This one is a little lighter so it oughta run a little faster with equal hp. This hull is considerably stronger then all the others.

RD

[SOCALCRICKETT]

So does it even have stringers, or does the vaccum baging make it that much stronger that a small boat like that doesn't even need them?

[wildone]

any one know if this is still for sale? if so how much..?

[River Lynchmob]

any one know if this is still for sale? if so how much..?

Don't know and...expensive i'm sure

[RiverDave]

So does it even have stringers, or does the vaccum baging make it that much stronger that a small boat like that doesn't even need them?

Some of them run a small center stringer.. Others don't have stringers at all. My old one didn't hve stringers in it, and it was SOLID.. The floor kind of acts like a big stringer when it's all glassed in.

RD

[RiverDave]

any one know if this is still for sale? if so how much..?

I know Stan was looking for a golf cart or a rhino for Lake Naci. I'd bet he'd trade the hull for one.

RD

[wildone]

Don't know and...expensive i'm sure

I'll have to call down and see i guess.. that or find a decent used one. need a winter project. possibly something to put around marina del rey in style next summer. the rigid inflatable isn't cutting it

[schiadastan]

This is a pricey little deal here, but if you have the coin you won't find a nicer hull to start with on planet earth..

Fully Vaccum Bagged, bitchen little 10'er. One person can pick this hull up and carry it and it's strong enough that you could drop it off a building and nothing would happen to it.

Call Lee for a price.

RD

I still have this. It would make a great one for the endro, or play.
If i dont sell it or trade it off for a rino or a golf cart i'm going to put it
together for the mini endro.
Stan
818-441-8555
818-904-6737

[MCnParker]

So did anyone get any idea of price?

[schiadastan]

So did anyone get any idea of price?

$7,500.00 firm , it would list out for over 10k
Stan

[.boatpoor]

ouch........

[Outdrive1]

If this one is a lighter hull, can it handle more than the 25-35 hp motors that the older 10's and 12's could handle?

From what I understand mine had a 50 on it and won the enduro back in the day. The following year they outlawed 50hp.;)

[Halvecto]

So how long is this mini enduro and what are the different classes?

[RiverDave]

So how long is this mini enduro and what are the different classes?

Waiting to hear back from Ross on that actually.. I know a lot of people want to do it.

RD

[coz]

$7,500.00 firm , it would list out for over 10k
Stan

:eek::eek::eek::eek: Really?!!!

[RiverDave]

$7,500.00 firm , it would list out for over 10k
Stan

ouch........

Well you can take the mold over to Brummett.. Have him lay you up a pure vinylester, cored, vacuum bagged hull and see what it costs if ya like.. :D

7500 is cheap for that hull..

RD

[River Lynchmob]

Well you can take the mold over to Brummett.. Have him lay you up a pure vinylester, cored, vacuum bagged hull and see what it costs if ya like.. :D

7500 is cheap for that hull..

RD

Not enough money out there to get Carson to lay up a boat...of any size

[RiverDave]

Not enough money out there to get Carson to lay up a boat...of any size

;) My point wasn't about Carson, just that happened to one in his avatar so that's what I picked. :D If you took that mold to any high end shop and had them build it like that, it's going to be more then 7500 bucks.

RD

[.boatpoor]

;) My point wasn't about Carson, just that happened to one in his avatar so that's what I picked. :D If you took that mold to any high end shop and had them build it like that, it's going to be more then 7500 bucks.

RD

Hey, are you tryin to give me a shot?:D

[schiadastan]

Hey, are you tryin to give me a shot?:D

Looks like he just blew you out of the water. LOL

[mbrown2]

Nice boat but you can have boat211's fully complete custom twin outboard version for only several thousand more....and who really cares about a vacumm bagging on a mini boat that won't break 50 except for someone drinking too much Schiada coolaid.....that's like billett engine covers on a 496 in a bayliner:)

[RiverDave]

Nice boat but you can have boat211's fully complete custom twin outboard version for only several thousand more....and who really cares about a vacumm bagging on a mini boat that won't break 50 except for someone drinking too much Schiada coolaid.....that's like billett engine covers on a 496 in a bayliner:)

Boat211's boat sold..

Old 1984 Schiada Hull.. 300.00
2K getting it stripped and holes filled and bottom thickened up a hair.
1500 - 2K getting new floor put in, well filled.. and touch ups on glass work from previous shop.
2K getting boat gelcoated..

I gotta be an idiot, because I now have about 6300 into a 1984 Schiada that's been fixed, and redone.. For another 1k I could've had a new hull that's lighter / stronger and a 2011. (year starts whatever year it's registered)

I think if you asked Boat211 what he had into his when he bought it, the #'s will come up similar on the hull..

I don't know if I've drank too much Schiada cool aid, or if it's because I've gone down this road twice now.. but it seems like a pretty good deal to me for a vacuum bagged, cored, vinylester boat. Restoring them isn't any cheaper.

RD

[schiadastan]

Nice boat but you can have boat211's fully complete custom twin outboard version for only several thousand more....and who really cares about a vacumm bagging on a mini boat that won't break 50 except for someone drinking too much Schiada coolaid.....that's like billett engine covers on a 496 in a bayliner:)


Just so you know, any one that puts together and has a performance boat should care about how there
boat is put together and layed up. Hitting the water at 50 can still kill you if a boat comes apart. The last 10 i put together with a stanard hull lay up, witch was around 250 lbs heaver
ran 58 on the gps. the one before that i had running 78 on the bottle.
Now in a 10 footer that is fast.

[RiverDave]

Just so you know, any one that puts together and has a performance boat should care about how there
boat is put together and layed up. Hitting the water at 50 can still kill you if a boat comes apart. The last 10 i put together with a stanard hull lay up, witch was around 250 lbs heaver
ran 58 on the gps. the one before that i had running 78 on the bottle.
Now in a 10 footer that is fast.

I hope you will share the engine / prop / heigh combinations in the other section for us guys getting ready to build em.. LOL

RD

[schiadastan]

I hope you will share the engine / prop / heigh combinations in the other section for us guys getting ready to build em.. LOL

RD

Always Dave. I want them all to run good and safe. I dont care what type of boat it is.

[mbrown2]

Just so you know, any one that puts together and has a performance boat should care about how there
boat is put together and layed up. Hitting the water at 50 can still kill you if a boat comes apart. The last 10 i put together with a stanard hull lay up, witch was around 250 lbs heaver
ran 58 on the gps. the one before that i had running 78 on the bottle.
Now in a 10 footer that is fast.

Having owned a Schiada, I was not questioning Schiada's build techniques or comparing them to any other builder...was just making a joke of the relavance of vacumm bag in a mini boat....I guess if someone is building it go 78mph it may make a difference...you have any vid of the boat going 78?

[schiadastan]

Having owned a Schiada, I was not questioning Schiada's build techniques or comparing them to any other builder...was just making a joke of the relavance of vacumm bag in a mini boat....I guess if someone is building it go 78mph it may make a difference...you have any vid of the boat going 78?

Sorry no vids on it. We did run the boat in the apba drags. the owners
doughter drove it. talk about making your hair turn grey. The boat is
still around i'm going to see if we can bring it out again.

[RiverDave]

Sorry no vids on it. We did run the boat in the apba drags. the owners
doughter drove it. talk about making your hair turn grey. The boat is
still around i'm going to see if we can bring it out again.

You know I'm not sure I'd want to do 80 in one of these things now that I think about it.. LOL

RD

[Boat211]

You know I'm not sure I'd want to do 80 in one of these things now that I think about it.. LOL

RD

I will I will!!!!!:thumbsup

[Crazyhippy]

I will I will!!!!!:thumbsup

Hell Yeah, it's like a ski, but w/ a seat and a motor:thumbsup:thumbsup:thumbsup:champagne:

[spudwig]

jaacba(Dan Aldrich) would be crazy enough to do it no problem. I heard that he almost took a grown man to tears in a 10 footer out in the ocean.
!! Dan??

You know I'm not sure I'd want to do 80 in one of these things now that I think about it.. LOL

RD