View Full Version : Need a business name..
RiverDave
10-30-2007, 03:30 PM
I've done side machining for the old mans engineering firm for years on a 1099.. Every year I get killed in taxes (aside from the point, but another factor).
Well now I have 4 or 5 companies hitting me up. All of them started as a friend asking if I could just help them real quick with something and have evolved into people dropping off multiple prints with 2 day lead times. So it's time for me to go get a business license so I can get paid on some of this stuff becusae helping a friend is one thing, but doing a couple grand in machining in 2 days for some company is an entirely different matter.
In the future I'll probably end up doing some boat parts again for various mfg's as things evolve, but I don't think the name should be marine themed only.
One I came up with last night was "Behind the 8 Machining" Not sure if you've ever heard the expression before "Behind the 8 ball" but it means your in a tough spot, or screwed more or less. I'm certainly not stuck on it though becuase it's long, and not very catchy..
Any suggestions for names?
RD
BarryMac
10-30-2007, 03:41 PM
Rack em up Machining...
Havasu Dreamin
10-30-2007, 03:43 PM
Eight Ball Machining
RiverDave
10-30-2007, 03:44 PM
Rack em up Machining...
The pool thing was just becuase it happened to coincide with a tough spot..
I really want something that reflects "Last Chance for gas 200 miles" :D
People typically hit me up when they need it done now.. like right now and they don't have time to wait for a quote, paperwork, P.O.'s, etc.. I look at a part, build it in my head rattle off the 1st # that comes to mind and they say yeah or ney.. To date nobody has said ney..
Typical lead times for machining are a couple weeks for a shop. I'll usually turn things next day or two days.. 3 - 4 days if it's a bigger job then a couple of parts or something extra ordinarily complex.
RD
Retired Member
10-30-2007, 03:45 PM
I've done side machining for the old mans engineering firm for years on a 1099.. Every year I get killed in taxes (aside from the point, but another factor).
Well now I have 4 or 5 companies hitting me up. All of them started as a friend asking if I could just help them real quick with something and have evolved into people dropping off multiple prints with 2 day lead times. So it's time for me to go get a business license so I can get paid on some of this stuff becusae helping a friend is one thing, but doing a couple grand in machining in 2 days for some company is an entirely different matter.
In the future I'll probably end up doing some boat parts again for various mfg's as things evolve, but I don't think the name should be marine themed only.
One I came up with last night was "Behind the 8 Machining" Not sure if you've ever heard the expression before "Behind the 8 ball" but it means your in a tough spot, or screwed more or less. I'm certainly not stuck on it though becuase it's long, and not very catchy..
Any suggestions for names?
RD
Not good for marketing. Seems like you are marketing toiward the people that dropped the ball, and you specialize in stuff that needs to be done last minute. You don't want to portay that image, it'll drive you nuts with all the people asking for last minute shit.
Tamalewagon
10-30-2007, 03:59 PM
Diamond Dave's Shave Shop.
RiverDave
10-30-2007, 03:59 PM
That kinda is the market I specialize in though for these types of jobs. People can't wait 2 - 3 weeks. They can only way 2 - 3 days, sometimes even same day?
RD
Flyinbowtie
10-30-2007, 05:53 PM
RPM-Rapid Precison Machine
ZLT...Zero Lead Time Machine
NIY...Need It Yesterday Machine
PPM-Parker Precison Machine :D
I think Cutting Edge Marine ....is available....:point
jordy
10-30-2007, 06:06 PM
RDS Machining...
Note the lack of apostrophe, that would be because it's really short for RD Sux. :point:beer:D
Figured that RD Sux Machining wouldn't lend itself to business very well, this way it seems like you're calling it RD's Machining and only the well versed Hotboat Forum member would know any different. :D
Good luck,
*****'s Consulting Firm. :D
jordy
10-30-2007, 06:07 PM
I think Cutting Edge Marine ....is available....:point
Bryan, stop hatin' on Lil' Mister... :rules :D
Lil' Mister's Cutting Edge Machine Works. :junk
RDS Machining...
Note the lack of apostrophe, that would be because it's really short for RD Sux. :point:beer:D
Figured that RD Sux Machining wouldn't lend itself to business very well, this way it seems like you're calling it RD's Machining and only the well versed Hotboat Forum member would know any different. :D
Good luck,
*****'s Consulting Firm. :D
:D:D:beer
whiteworks
10-30-2007, 07:23 PM
Just In Time mfg.
River
10-30-2007, 07:54 PM
Not good for marketing. Seems like you are marketing toiward the people that dropped the ball, and you specialize in stuff that needs to be done last minute. You don't want to portay that image, it'll drive you nuts with all the people asking for last minute shit.
At Designer Marine Interiors way back when, they had an imprint on the back of the biZ cards.
"Poor planning on your part does not mean an emergency on mine"..
Friggin boat dealers! :D
At Designer Marine Interiors way back when, they had an imprint on the back of the biZ cards.
"Poor planning on your part does not mean an emergency on mine"..
Friggin boat dealers! :D
On the bottom of my cards, in small letters it says F.Y.P.I.Y.
(Fuck you, paint it yourself) :D
angiebaby
10-31-2007, 05:30 AM
Up Shit Creek MachineWerx
I Can Do It but It'll Cost Ya Machine Works
Honestly, I liked FBTs ideas.
A simple name is good.
I used to use 'Rush' Machine shop in LA.
His speciality was shafts. Lot's of fan and pump shafts disintregrate daily and the MFGs want weeks, perhaps months to ship replacements.
"The bigger, the slower".
He gave his machinists all the overtime they wanted. Some guys are overtime whores so that was easy, and it was all good.
He usually could accept work in a 24 hour window and get it back in 12 hrs.
Little favors like a huge stock of bearings on hand (or order from someone who does) he'd press on the shaft, you're quickly good to go. Made him a standout. Didn't charge all that much more either.
I say: 8 ball. Comic logo with wings on a billet looking ball.
With a very small "Behind the" tatoo'd style on the ball.
angiebaby
10-31-2007, 07:24 AM
The only problem with "8 Ball" are the illicit drug connotation that goes along with it. I like the design idea, though, Ross.
The only problem with "8 Ball" are the illicit drug connotation that goes along with it. I like the design idea, though, Ross.
That's true. Forgot about that. It could look derelict.
"Poor planning on your part does not mean an emergency on mine"..
I use to use that one all the time... til I had an emergency, that is...lol
I switched to "it's better to beg for forgiveness than ask for permission"..
or just a plain ol fu will do :D
Baja Big Dog
10-31-2007, 09:37 AM
Make it sound professional, do not use any context to drugs, or jokes, if your serious, use a serious name. That business (that I am in) is driven by a lot of old timers in some cases, and they wont dial a name that doesnt sound serious.
Try "SUX MACHING WORKS" kidding.....
How RD machine :beer
OCMerrill
10-31-2007, 10:04 AM
I spent months fretting over a name years back. I just could not hook something I liked that fit. So I took the easy way out. My business (screen name sans the OC) is just my last name.
I would advise against just initials in a name. Like RDM (RiverDave Machine)To easy to forget just what the letters stand for from a first time customer standpoint, although it's very popular in the Marine Ind. DCB, DCM, and the like.
You could always be the Co. at the end. DaveCo Machine but it sounds very 70's.
All the "Accurate, Precision, examples are used over and over.
Harder than one thinks.
yopengo
10-31-2007, 10:15 AM
OCM - On Cue Machining
CCM – California Custom Machining.
:D
yopengo
10-31-2007, 10:20 AM
RCM - Rapid Custom Machining
MQM – Make it Quick Machining.
…and my favorite:
IMIFTTOFM – Ill Make It Faster Than The Other Fukker Machining. :D
OCMerrill
10-31-2007, 10:35 AM
OCM - On Cue Machining
CCM – California Custom Machining.
:D
:D:D
OCM. I had a hard time getting Property Managers to remember it. Changed it to just my last name and things picked up.
OCM Oregon Custom Marine. Initals are very popular boating related.
RiverDave
10-31-2007, 10:50 AM
I kinda wanted to stay away from the initials.. but I gotta admit with USC not far away, and the underlying "Up Shit Creek" machining.. LOL I like it. :D
the words "custom" "rapid" etc.. are used in every shop, and I think are played out 6 ways to sunday.
RD
jordy
10-31-2007, 10:55 AM
As silly as it sounds, I'd stay away from anything that ties you to one particular brand, such as USC Machining. Even though it wouldn't necessarily have anything to do with the school, there are people out there that are so true to their school that they would go out of their way to not do business with someone who has any hint of being affiliated with a rival school. ;)
RiverDave
10-31-2007, 10:56 AM
As silly as it sounds, I'd stay away from anything that ties you to one particular brand, such as USC Machining. Even though it wouldn't necessarily have anything to do with the school, there are people out there that are so true to their school that they would go out of their way to not do business with someone who has any hint of being affiliated with a rival school. ;)
That's just twisted... LOL
RD
As silly as it sounds, I'd stay away from anything that ties you to one particular brand, such as USC Machining. Even though it wouldn't necessarily have anything to do with the school, there are people out there that are so true to their school that they would go out of their way to not do business with someone who has any hint of being affiliated with a rival school. ;)
Yeah....and dont wear red....:point
jordy
10-31-2007, 11:57 AM
Yeah....and dont wear red....:point
Stop hatin Byron. :rolleyes:
Flyinbowtie
10-31-2007, 12:24 PM
Well Oiled Machine
A Piece of Work
Integrity Machine Services
Driven To Machine
RiverDave
10-31-2007, 12:29 PM
Well Oiled Machine
A Piece of Work
Integrity Machine Services
Driven To Machine
I like those!!
RD
Stop hatin Byron. :rolleyes:
Not hatin...educatin....:p
jordy
10-31-2007, 01:05 PM
I like those!!
RD
Fine. I rescind my previous suggestions... :junk:hmm:D
RiverDave
10-31-2007, 01:06 PM
Well I needed it kinda Jonny on the spot, and out of all of them that I had read on here, the only one that came to mind was the original one. "Behind the 8" so that's what I went with..
I do appreciate all the suggestions though! :) It definately gave me alot to think about. I don't expect this business is going to take off to be some big company or something, just something so I can collect for my side jobs, and maybe have some tax relief.
RD
Yeah...."Behind the 8" Sux
:D
When Im thinking about having a company do some work for me...."behind" is a word I wanna hear....lol.... as In ...behind schedule....:D
OCMerrill
10-31-2007, 01:19 PM
Yeah...."Behind the 8" Sux
:D
When Im thinking about having a company do some work for me...."behind" is a word I wanna hear....lol.... as In ...behind schedule....:D
Funny shit there Bryan. :D
That word is very popular around the SF Bay area. :drool
RiverDave
10-31-2007, 01:27 PM
Yeah...."Behind the 8" Sux
:D
When Im thinking about having a company do some work for me...."behind" is a word I wanna hear....lol.... as In ...behind schedule....:D
Well if and when I figure out how I'm going to make my millions I won't use "behind' in the name. ;)
RD
Racey
10-31-2007, 01:38 PM
Before even reading any of the responses 'Rapid' came to mind, looks like that's a winner to me. something with Rapid in it for sure
lebel409
10-31-2007, 01:50 PM
Chips and Dips? :D
Eight ball is also related to a F up in general, besides the drug thing.
Instant Swarf
Turnaround on Your Dime
Deadline Dave's Machine Works
CCM...Chino Correctional institute for Men...no go for me
As cool as the letter Z is, it'll be found last...
Angry Inch
10-31-2007, 01:59 PM
You're customer base might expand beyond the last minute guys; and, a name that implies getting things done quick could imply that it is not done with quality in mind. Sort of like the saying: Fast, Quality, Inexpensive, pick two.
I say pick something that really doesn't imply anything. Your reputation for getting the job done right at a decent turn around time will supersede any name.
Retired Member
10-31-2007, 02:25 PM
Dynamic Machine Concepts
SuperDave013
11-01-2007, 09:03 AM
Once you get a business license and resale # you'll have all kinds of fun stuff to deal with.
You'll still pay your income tax but will have to do it every quarter. And you will just love filling out all that bs for your sales tax. Even if everything is for resale you still have to fill out the paper work. I'm lucky that my wife takes care of all the bookwork for us.
But from what I see one of the main reasons a lot of small biz fail is because they don't keep up on that stuff.
Are you going to be whateveryoucomeupwith, Inc. ?? If so then you get to do even more paper work and pay even more taxes.
I sometimes wish I kept it to cash only on the DL.
BTW, sales tax payments were due yesterday.
H4Poohbah
11-01-2007, 03:29 PM
RD your decision but I don't think alot of Wyatt Earp fans are looking for Machining, besides more people like Tombstone much better. I dunno the name does fit the situation; you really are behind the 8 now. :offtopic Or is it?
Tom Brown
11-01-2007, 04:37 PM
RiverDave's Blowjob Emporium and Custom Machine Works.
RiverDave
11-01-2007, 05:40 PM
RD your decision but I don't think alot of Wyatt Earp fans are looking for Machining, besides more people like Tombstone much better. I dunno the name does fit the situation; you really are behind the 8 now. :offtopic Or is it?
What does wyatt earp have to do with it?
Behind the 8 has been another way of saying "tough spot" for as long as I can remember (even with non pool players?) Hell I was watching TV the other day and a financial commercial came on, and they used the phrase "Behind the 8 ball"
I think you might be thinking of Aces n eights which was the hand Wild Bill Hicock was holding when he was shot.. "Dead mans hand"
RD
digger
11-01-2007, 08:00 PM
Dave's Machine Shop
Last Chance Machine Shop
Last Chance Machining
Get 'er Done Machine Shop
RiverDave
11-02-2007, 04:15 PM
Thanks for all the replies guys!! :)
RD
PunkAssBitch
11-02-2007, 05:24 PM
Dynamic Machine Concepts
that's funny...my biz is Dynamic Cleaning Services...
Tom Brown
11-02-2007, 06:14 PM
Thanks for all the replies guys!! :)
Happy to help, Dave. :)
Retired Member
11-02-2007, 06:18 PM
that's funny...my biz is Dynamic Cleaning Services...
Shouldn't it be Domestic Cleaning Service?
dezertrider
11-02-2007, 06:29 PM
I did'nt read the thread but this other new thread gave me an idea
Chicken Hauler
PunkAssBitch
11-02-2007, 07:26 PM
Shouldn't it be Domestic Cleaning Service?
no dear...I don't clean MY house. OMG, you should see the mess in here right now....wait, no, you shouldn't. You know how mechanics never work on their own cars...yeah, that's the story here ;)
Actually...I'm a sub-contractor....cleaning up houses that have been rehab'd or getting ready to be put on the market.
vBulletin® v3.7.2, Copyright ©2000-2012, Jelsoft Enterprises Ltd.