Need Info on Removing and Reinstalling Berkeley Nozzle

bryzmon · Jun 6, 2017

I need to replace the Nyliner Bearings (#29). Looks like I remove the Shaft Pin (#15) and Rudder Pin (#55), I watched the YouTube videos by CP Performance on how to remove and install but there is no sound.
Remove: [video=youtube;ArjTab5iNZA]https://www.youtube.com/watch?v=ArjTab5iNZA[/video]
Install: [video=youtube;jfeJp_DVMQM]https://www.youtube.com/watch?v=jfeJp_DVMQM[/video]

I need to bring tools with me, does someone know exactly what I need and any tips on the job? Looks like a little grease on the inside of the Nyliner Bearing? Model is 12JG. Appreciate the tips!

jetboatperformance · Jun 8, 2017

Nyliner bushings are cheap and very simple to replace assuming that the various fasteners cooperate , the Videos you posted show a Place diverter vs a standard Berkeley nozzle which also uses similar nyliners to standard Berkeley applications , In general its simple a matter of removing the allen or set screw from the respective stainless pivot pins , pushing out the pin(s) replacing the nyliner and reinstalling the pin steering nozzle Nyliners install from the inside in most cases , so for example #1 remove set screws push out pins, #2 remove steering assy , #3 replace nyliner, reinstall pin and set screws, call anytime for Tech We answer dozens of calls live and personal every day vs FAQs and soundless Videos :cool 805 466 4719

http://www.jetboatperformance.biz/pages/rebuild_kits.html

bryzmon · Jun 8, 2017

jetboatperformance said:
Nyliner bushings are cheap and very simple to replace assuming that the various fasteners cooperate , the Videos you posted show a Place diverter vs a standard Berkeley nozzle which also uses similar nyliners to standard Berkeley applications , In general its simple a matter of removing the allen or set screw from the respective stainless pivot pins , pushing out the pin(s) replacing the nyliner and reinstalling the pin steering nozzle Nyliners install from the inside in most cases , so for example #1 remove set screws push out pins, #2 remove steering assy , #3 replace nyliner, reinstall pin and set screws, call anytime for Tech We answer dozens of calls live and personal every day vs FAQs and soundless Videos :cool 805 466 4719

http://www.jetboatperformance.biz/pages/rebuild_kits.html

I was hoping you would respond to this, thank you! Sounds straight forward and just need basic tools.

AzGeo · Jun 8, 2017

bryzmon said:
I was hoping you would respond to this, thank you! Sounds straight forward and just need basic tools.

and some LOC-TITE ............

Professional shops always use it, and often forget to mention 'use Loc-Tite here', because it's just an everyday item like a tool for them ...........

jetboatperformance · Jun 9, 2017

AzGeo said:
and some LOC-TITE ............

Professional shops always use it, and often forget to mention 'use Loc-Tite here', because it's just an everyday item like a tool for them ...........

Ahhhh Loc tite noted

Need Info on Removing and Reinstalling Berkeley Nozzle

bryzmon

Not a Member

jetboatperformance

Well-Known Member

bryzmon

Not a Member

AzGeo

Fair winds and following seas George.. Rest Easy..

jetboatperformance

Well-Known Member