YZFRider
Well-Known Member
- Joined
- Jan 10, 2008
- Messages
- 385
- Reaction score
- 149
There are not a lot of before and after detail jobs in this section, so I figured I would post one up. Here are some pics of a color sanding job I recently completed. Pictures do not do it justice, but as you can see the boat has quite a bit of oxidation and swirls. To get the boat back to new, I used my DA Buffer and damp sanded the boat starting with 1000 grit, working my to 3000. I finished with a compound and a light cutting pad. Finally, I sealed the boat using Marine 31 sealant. It took me approximately 6 hours to color sand this boat. Thanks for looking and let me know if you guys have any questions.
http://www.attention2detaillhc.com
http://www.attention2detaillhc.com