WELCOME TO RIVER DAVES PLACE

CLEANING OUT THE HOUSE SECTION!

TEAGUE CUSTOM MARINE

Well-Known Member
Joined
Aug 18, 2010
Messages
675
Reaction score
635
A who for the what mow??? We only have the Dual, single pedal in stock... Are you trying to match a solid pedal in a Left foot? Send me pics of what you have and ill see what I can come up with!

-Eric
[email protected]
 

Riverbound

Banned
Joined
Sep 26, 2007
Messages
26,752
Reaction score
19,207
A who for the what mow??? We only have the Dual, single pedal in stock... Are you trying to match a solid pedal in a Left foot? Send me pics of what you have and ill see what I can come up with!

-Eric
[email protected]

I have a single pedal for the throttle and they used to make a solid pedal...not for throttle but more or less for a foot hold. I have only ever seen two.

This is what I have. Need the left side and one that is stationary and wouldn't move.

View attachment 377705
 

Maestro

Well-Known Member
Joined
May 27, 2008
Messages
1,284
Reaction score
506
JE PISTONS 257970, BBC Flat top pistons w/ 51s 180 wall std pins.

http://teaguecustommarine.com/em001...-395-compression-height-flat-top-pistons.html

Bore: 4.310
Stroke: 4.000
Rod length: 6.385
Compression height: 1.395
Piston weight: 586

$500.00 for pistons and pins, Rings extra.


Give me a call or order online! -Eric

TEAGUE CUSTOM MARINE




661-295-7000
www.teaguecustommarine.com


View attachment 376697 View attachment 376689 View attachment 376696 View attachment 376694 View attachment 376695 View attachment 376693 View attachment 376692 View attachment 376691 View attachment 376690

Please check pm, I'm interrested and have a couple questions
 

Shortdeck

Well-Known Member
Joined
Jul 6, 2014
Messages
1,091
Reaction score
742
ImageUploadedByTapatalk1417557500.299220.jpg
Does Teague make the cavitation plate extension similar to the one in the picture? And would it help getting on plane? I have a 22' Domn8er deck. I ordered a drive shower from Teague, and before I drilled any holes, I was thinking of adding that cavitation plate.
 

TEAGUE CUSTOM MARINE

Well-Known Member
Joined
Aug 18, 2010
Messages
675
Reaction score
635
View attachment 379452
Does Teague make the cavitation plate extension similar to the one in the picture? And would it help getting on plane? I have a 22' Domn8er deck. I ordered a drive shower from Teague, and before I drilled any holes, I was thinking of adding that cavitation plate.

The Cav Plate shown is an IMCO (what we primarily use). Give me a call and we can get you set up with one. If you have an IMCO or Merc SportMaster lower housing, you are going to need a cav. plate to help get you onto plane and at slower speeds. They are $126.00 for the kit, per drive. -Eric
 

Maestro

Well-Known Member
Joined
May 27, 2008
Messages
1,284
Reaction score
506
JE PISTONS 257970, BBC Flat top pistons w/ 51s 180 wall std pins.

http://teaguecustommarine.com/em001...-395-compression-height-flat-top-pistons.html

Bore: 4.310
Stroke: 4.000
Rod length: 6.385
Compression height: 1.395
Piston weight: 586

$500.00 for pistons and pins, Rings extra.


Give me a call or order online! -Eric

TEAGUE CUSTOM MARINE
661-295-7000
www.teaguecustommarine.com


View attachment 376697 View attachment 376689 View attachment 376696 View attachment 376694 View attachment 376695 View attachment 376693 View attachment 376692 View attachment 376691 View attachment 376690
Sold:skull
Thanks
 

K-DOG

Well-Known Member
Joined
Jun 6, 2008
Messages
789
Reaction score
515
How about a drive shower for a bravo one outdrive?
 

K-DOG

Well-Known Member
Joined
Jun 6, 2008
Messages
789
Reaction score
515
I will take it. PM sent. Thank you
 

mjackson

Member
Joined
Sep 4, 2012
Messages
12
Reaction score
2
TEAGUE CUSTOM MARINE, Purple Battery boxes for Group 24 or 27... This sale is only for these Purple battery boxes (listed below). Lets just say we did a large run of coated boxes and they never left... Remember, they do not have to be purple forever.

Group 24: 5 @ $75.00ea
Group 24 w/ Cover: 6 @ $120.00ea
Group 27 w/ Cover: 8 @ $140.00ea


Must call! Hey, we can wheel and deal if you want to buy more than 1 at a time... -Eric

View attachment 257170 View attachment 257171


Dude you know my purple Daytona needs these. You were IN MY BOAT and didn't put these on the list???
 

tkrrox

Well-Known Member
Joined
Jun 16, 2010
Messages
2,137
Reaction score
645
For you guys looking for a used drive, here you go. Here is your new, used BMAX! Take off from a customer owned Howard 26 cat.

Good housings, low water pick-up, good u-joint's and shafts (1.25" prop shaft), 1.3ish ratio, etc. Needs cone clutch and is being as sold as is..

$1,899.00 obo, come and get it. -Eric

http://teaguecustommarine.com/em0011/1-used-bmax-outdrive.html

View attachment 407649 View attachment 407655 View attachment 407651 View attachment 407650 View attachment 407652 View attachment 407654 View attachment 407653

What horsepower is it rated for and PM me what it will cost to make good and install on my hallett 240
 

Maestro

Well-Known Member
Joined
May 27, 2008
Messages
1,284
Reaction score
506
looking for a thru hull clamshell style brass pickup 1"ID
 

TEAGUE CUSTOM MARINE

Well-Known Member
Joined
Aug 18, 2010
Messages
675
Reaction score
635
Hey Scapegoat,

We might have a few brass pick ups in the back, turning green and collecting dust. Give me a call (sorry it took so long to respond), ill see what we got for you.

-Eric
 

Shortdeck

Well-Known Member
Joined
Jul 6, 2014
Messages
1,091
Reaction score
742
You guys over at Teague are awesome!! Thanks for the fast shipping and BC speed gloss.
 
Top