WELCOME TO RIVER DAVES PLACE

13 year old boat looks new again

Joined
Dec 12, 2016
Messages
20
Reaction score
22
Hello everyone! Merry Christmas from Martinez Marine Interiors
We are happy to share how a 13 year old boat can look new again.
Tim firster picked up this 28' commander deck boat for $34,000.00 and yes it needed some TLC.
After putting a 565 dart block, big brodex heads, 1050 dual pump holly carb, victor manifold, on a max marine built bravo 2 drive with a 28" prop. He brought it to us to put the final touches.

We did a colorsand and buff to bring back the factory shine.
sent out exterior hardware to powder coating. ( perfect time to do since all exterior parts were removed ) also added a new elite off shore billet control.
While the boat was being buffed we added headrests to the hatch, built a new captin seat, split and or widened all bottom cushions, and replaced foam and foam placements for great comfort and safety.
We topped it all off with 4 colors on a white base upholstery.
This bost now has the feel of a brand new boat.
20161224_094608.jpg 20161224_095531.jpg 20161223_161710.jpg 20161224_093942.jpg 20161224_093047.jpg 20161224_095751.jpg 20161224_095809.jpg 20161224_095905.jpg IMG_20161212_173948.jpg 20161224_092937.jpg 20161224_093105.jpg
 
Joined
Dec 12, 2016
Messages
20
Reaction score
22
Looks great Eddie! The spectra you did for us a couple years ago is holding up perfectly as well!!
Thank you! Would love to see a picture posted on this thread. Do you have something you can share? So we can show a variety of styles.
 
Joined
Dec 12, 2016
Messages
20
Reaction score
22
Looks great! Nice work [emoji106]

How does that stitching hold up over time on the drivers seat?
The thread recommended is made by sunguard ( which was used in this interior shown)
UVR Bonded Polyester Thread is perfect for Marine and Outdoor applications...anywhere the UV Resistance is a must. Anti-Wicking and Colorfast Dyes.
Quality Thread SUNGUARD is twisted and bonded through a state-of-the-art bonding and dying process, to ensure the highest quality of colorfastness and performance. Every SUNGUARD product is manufactured to meet anti-wick standards, which reduces seam leakage. Each production lot is tested to meet or exceed the QTN Quality Assurance standards.

If you use sun guard thread its sure to hold up.
 
Top