wettrthebettr
Well-Known Member
- Joined
- Sep 14, 2018
- Messages
- 1,043
- Reaction score
- 839
I would like to know how much cooling does a ace Champion V-drive need.
Does it need psi from water pump or can it just get the psi from the speed of boat?
Does it need 3/4" hose or can it go with smaller size hose?
this is not a Drag flatty just a campbell cruiser.
I was going to pull the water from bottom of boat plumb to V-drive and dump it threw Shaft log 3/8 fitting, psi would be what ever the speed of boat.
The other way would be put a tee from pump hose that goes into the rear of Exhaust manifold to V-drive to Shaft log then out threw hull fitting, and reverse the flow but it would be pumped psi.
Thanks
Does it need psi from water pump or can it just get the psi from the speed of boat?
Does it need 3/4" hose or can it go with smaller size hose?
this is not a Drag flatty just a campbell cruiser.
I was going to pull the water from bottom of boat plumb to V-drive and dump it threw Shaft log 3/8 fitting, psi would be what ever the speed of boat.
The other way would be put a tee from pump hose that goes into the rear of Exhaust manifold to V-drive to Shaft log then out threw hull fitting, and reverse the flow but it would be pumped psi.
Thanks