WELCOME TO RIVER DAVES PLACE

Looking for hatch hinges

SpectraPat

Well-Known Member
Joined
Mar 21, 2013
Messages
552
Reaction score
410
Any one know where I can pick up a pair of these hinges?
11B711C8-546F-4E1F-9464-8E06264D04E7.png
DFE77478-A872-46E6-81A5-4E8D9176F425.png
 

SpectraPat

Well-Known Member
Joined
Mar 21, 2013
Messages
552
Reaction score
410
Thanks, but not the same. This type requires cutting a notch in the fiberglass. I’m trying to avoid that. Thanks again
 

74 spectra20 v-drive

74 spectra20 v-drive
Joined
Nov 27, 2008
Messages
2,030
Reaction score
2,844
Hey Pat, you may run into an issue with those, not sure if the spectra will have enough room to swing up inside deck. I used these from Eddie Marine... I made a 3/8 plate to hang the hinge in and spread the load out.
 

Attachments

  • SPECTRA HINGE1.jpg
    SPECTRA HINGE1.jpg
    68.6 KB · Views: 245
  • SPECTRA HINGE 2jpg.jpg
    SPECTRA HINGE 2jpg.jpg
    57 KB · Views: 153

SpectraPat

Well-Known Member
Joined
Mar 21, 2013
Messages
552
Reaction score
410
Hey Pat, you may run into an issue with those, not sure if the spectra will have enough room to swing up inside deck. I used these from Eddie Marine... I made a 3/8 plate to hang the hinge in and spread the load out.
Thanks!
 

Gripside80

Well-Known Member
Joined
Feb 19, 2016
Messages
313
Reaction score
461
Those hinges are made by Stan at Schiada. Not a part you can just pick up.
 

tony

Well-Known Member
Joined
Aug 14, 2008
Messages
927
Reaction score
243
Those hinges are made by Stan at Schiada. Not a part you can just pick up.
That was my 24 schiada and I had Scott Kornaski make the hinges and the fiberglass hatch while it was getting the interior done at Bill Sturgis place.
 

Gripside80

Well-Known Member
Joined
Feb 19, 2016
Messages
313
Reaction score
461
That was my 24 schiada and I had Scott Kornaski make the hinges and the fiberglass hatch while it was getting the interior done at Bill Sturgis place.

Nice. Love that 24. One of the nicest. Lee/Stan makes the exact same ones. Regardless of who makes those.... it’s not a “buy it now” part. They are made to fit each boat/hatch perfectly.
 

FrznJim

Well-Known Member
Joined
Dec 22, 2007
Messages
785
Reaction score
307
Get out the saber saw and make your own. That’s what I did.
 

SpectraPat

Well-Known Member
Joined
Mar 21, 2013
Messages
552
Reaction score
410
You can try these if you have the room. I’m modifying the ones I bought. Good luck!

 

Water Romper

Well-Known Member
Joined
Dec 22, 2007
Messages
1,067
Reaction score
1,602
You can try these if you have the room. I’m modifying the ones I bought. Good luck!

These look pretty good. $70.00 for the pair seems reasonable. would you mind posting a few photos of your install? Thanks!!
 
Top