BigQ
Well-Known Member
- Joined
- Jan 30, 2008
- Messages
- 1,316
- Reaction score
- 256
Not sure where to put this question, but since there was no "general" in the tech section i'll ask here.
I removed all the seats and panels from my interior for cleaning and overall curiosity of the build. Anyway, most of the parts are just screwed down to the wood floor and fiberglass panels; should I use any silicon or sealant on the threads when I put them back in?
On a side note I was a little surprised at the rigging on the 2000 eliminator, not much more then the last Commander I had. At least all the wood appears to be treated or glassed, so it is definitively more of a solid build.
I removed all the seats and panels from my interior for cleaning and overall curiosity of the build. Anyway, most of the parts are just screwed down to the wood floor and fiberglass panels; should I use any silicon or sealant on the threads when I put them back in?
On a side note I was a little surprised at the rigging on the 2000 eliminator, not much more then the last Commander I had. At least all the wood appears to be treated or glassed, so it is definitively more of a solid build.
Last edited: