BamBam's latest activity

This may help

I am happy with the way this turned out. 😎👍 Anyone know a trailer guy 😅

This is a great boat and ready for the season with all the options you need to enjoy.

Very cool idea to do something different than just stringer washers, but I agree with the two posts above this. It will be a pain in the...

3/16" 304ss blast plates made.

Off to powdercoat 👍

This is what I have. I'll need to buy an internal balanced flywheel for it and I'll need to machine a spacer for the thickness of my...

I currently run a heavy steel flywheel but there is no reason you couldn't run aluminum @lenmann I prefer the spline drive. First...

The drive plate bolts to the flywheel using the holes that the pressure plate would normally use to bolt up. Check your clearance when...

More progress on the cav plate setup

Plate pads almost done. Just need to tap the holes.

Added the second row of bolts holes

If you're thinking you should add a row of bolts, then you should probably add a row. That plate bends (flexes) it is't a hinge and your...

I decided to start with a 3/8" gap on the plates. Should be plenty with this shallow "V"

More mock up.