Recent content by steven vaccaro

Thanks for the help!

Thanks for the info.

Thanks and sorry for the lack of info. I should have worded my question better. Im referring to the top alarm. I fixed the other low voltage alarms with a battery charger. But the top one is different. I was getting the alarm when going from about half to full throttle. The simrad display is...

I'm getting an alarm but the display doesn't allow me to read the entire message. Does anyone know how to see the rest without having to bring it to a dealer? I've attached a picture.

Thanks, I saw that but was looking for a bit more power than that.

Anyone know of any blower kits available for the merc 565 or done any mods to increase hp?

Equalizer 1 was filmed about 100 yards from mystore in Chelsea Ma. They offered me some money to do something in my store on a Friday night. I turned it down because it would take away from one of my boating weekends. :-)

Thanks for all the help. It turns out the factory installed the drive with a kink in the hose the goes from the drive to the inside of the transom. So at high speed the water forced the kink open. The kink was removed and pressure is way up. But now it's up to high. Over 40psi. So we plan to...

We plugged the top 4 holes this past Sunday and no improvement. The only time the pressure gets above 20psi is if I'm going 65mph or more. At slower speeds is it possible that the water is entering the cone and exiting the side ports? Sent from my SM-N950U using Tapatalk

Also I forgot to add it's a closed loop system. Sent from my SM-N950U using Tapatalk

In that 25 to 40mph range it gets hot and won't cool down. I'm not a tech, but I assume that's because the pressure is in the 5 to 8 psi range. If I get in the 45 plus range the pressure goes over 10 psi and it runs cooler. Sent from my SM-N950U using Tapatalk

The motor is a 2017. The original impeller looked warn not broken. So they didn't backflush it. Sent from my SM-N950U using Tapatalk

I'm having an issue when driving between 25 to 45mph. The water pressure stays at 5psi and after not to long I get an over heating alert at about 175f. Water pressure doesn't built up until around 4000rpm(about 45-50mph). I brought it to a performance boat shop for repair. He's changed the...

Thanks for all the help. Im going to lift it as it is on the trailer.