WELCOME TO RIVER DAVES PLACE

need help from someone with a placecraft 22 deck boat. can you measure the rear??

bartel

Well-Known Member
Joined
Mar 24, 2011
Messages
151
Reaction score
20
Im creating a name sticker for the back of the boat. There are two flat panels on the back of the boat above the swim steps and to the out side of the exhaust tips. I measured these once before but I can not find where I wrote them down on.

I believe they are 6 inch by 20 inch or something. If someone has a placecraft that they have access to can they please measure these back flat panels where a boat name would go. I want to make the lettering as big as possible but don't want to make them too big.


thanks in advance.. I plan on getting the sticker printed today so an early response would really help
 

Riley1

Well-Known Member
Joined
Oct 28, 2014
Messages
2,270
Reaction score
3,819
The easiest way to get those dimensions might be to call Shockwave in Corona. I believe they now have the mold.
 

bartel

Well-Known Member
Joined
Mar 24, 2011
Messages
151
Reaction score
20
thanks. I have been trying to call placecraft but no answer. I will try shockwave
 

bartel

Well-Known Member
Joined
Mar 24, 2011
Messages
151
Reaction score
20
ok called shockwave. they said they have changed the mold a bit. He went out and measured from the rub rail to the top of the glass and he got 14 inches. this seems way too big. I think I remember it being 6-8 inches only. Can anyone confirm?
 

bartel

Well-Known Member
Joined
Mar 24, 2011
Messages
151
Reaction score
20
ron only has a 23 on hand. damn where did I put those dimensions?????
 

bartel

Well-Known Member
Joined
Mar 24, 2011
Messages
151
Reaction score
20
https://scontent-lax3-1.xx.fbcdn.net/v/t1.0-9/255177_1831112532974_4870371_n.jpg?oh=f3d2bf9de07e713564af0ace02ca7c37&oe=580400CB[\img]

you can see the flat areas here above the swim step and below the grab handles. im pretty sure they are each about 24 inches wide. but I don't know how tall from the rub rail up??
 

Outdrive1

Outdrive1 Marine Sales https://www.outdrive1.com/
Joined
Dec 19, 2007
Messages
32,731
Reaction score
28,069
I have one coming in Thursday. I'll try and get a measurement.
 

bartel

Well-Known Member
Joined
Mar 24, 2011
Messages
151
Reaction score
20
thanks guys. i did my lettering 6 inch by 20 inch long. if someone can let me know dimensions before I leave thurs night then if the letters I made wont fit I can have them re made before I head to the river
 
Top