WELCOME TO RIVER DAVES PLACE

Search results

  1. DiMarco21

    Merc Outboard 3 Liter Seals

    Mercury Outboard 3 Liter Seal This beautifully machined seal replaces Mercury Marine's 3 Liter Seal P/N 840836A1. Our 3 Liter Seal uses 4x double lip seals and a snap ring at the bottom to firmly hold it together for safety. Unlike the Mercury seal that uses 2x seals and no snap ring...
  2. DiMarco21

    The Great Labor Day Cruise

    Thanks Jerry. It's a 50 Chevy. :) An my favorite lol.
  3. DiMarco21

    The Great Labor Day Cruise

    Thanks for the pics Jerry. Great turnout, a pretty long haul for our sled.
  4. DiMarco21

    Schiada 21 RC V -Drive Degree question

    Great job on the v-drive identification Toolmaker Daryl!!! :thumbsup
  5. DiMarco21

    Sloppy rudder help.

    Thank you very much!!!! :thumbsup
  6. DiMarco21

    J drains

    I make these.... J-Drain Replacement Kit Our kit replaces existing leaking j-drains and converting it to a 1" twist-in style drain plug. Made from 6061-T6 aluminum, that can be easily polished or anodized to match your hardware. Fit a standard hole pattern for the 2" x 2" j-drain...
  7. DiMarco21

    Schiada 21 RC V -Drive Degree question

    Shouldn't you be making your parts on a drill press or something. :cool True story. :D
  8. DiMarco21

    Collins Super V-Drive Billet 10 Degree V-Drive Cases

    Super V-Drive Billet 10 Degree V-Drive Cases Made from beautifully machined 6061-T6 aluminum for Schiada Boats. Uses a 5/16" bolt through design for superior strength with small counter-bores on front face to conceal possible bolt galling. Raised water jacket to allow a 80% gear ratio...
  9. DiMarco21

    Collins Super V-Drive Billet 10 Degree V-Drive Cases

    New Super V-Drive Billet 10 Degree V-Drive Cases Made from beautifully machined 6061-T6 aluminum for Schiada Boats. Uses a 5/16" bolt through design for superior strength with small counter-bores on front face to conceal possible bolt galling. Raised water jacket to allow a 80% gear...
  10. DiMarco21

    Collins "Super V- Drive" for Schiada

    Stan at Schiada is assembling the first set. He's almost done. They will be available on our website by the weekend. The Super V-Drive is approx. 1/2" taller and 1" wider (left to right) than the standard Collins billet case. Thickness is the same. Gear range is 38%-80% overdrive. We do...
  11. DiMarco21

    Stainless 1 1/8" Tiller Arm by Schiada / Collins

    Stan and Daryl are building some top notch stuff!!! :thumbsup
  12. DiMarco21

    Stainless 1 1/8" Tiller Arm by Schiada / Collins

    This 1 1/8" Tiller Arm was designed for Schiada Boats. Beautifully machined from 303 Stainless Steel round bar for strength. It measures 6" long from the 1 1/8" diameter rudder bore to the two 1/2" diameter heim joint holes. A 1/4" standard keyway is used to fit your rudder. Featuring two...
  13. DiMarco21

    Stainless 1 1/8" Tiller Arm by Schiada / Collins

    This 1 1/8" Tiller Arm was designed for Schiada Boats. Beautifully machined from 303 Stainless Steel round bar for strength. It measures 6" long from the 1 1/8" diameter rudder bore to the two 1/2" diameter heim joint holes. A 1/4" standard keyway is used to fit your rudder. Featuring two...
  14. DiMarco21

    New V-Drive Top Bearing Cap for Tach

    Yes I do. Thanks for letting us post the new v-drive stuff up Dave!!!!
  15. DiMarco21

    New V-Drive Top Bearing Cap for Tach

    Top Bearing Cap Tach Made from beautifully machined 6061-T6 aluminum. This cap is vented and is a direct replacement for you cast top bearing cap with a tach drive. 6 hole bolt pattern. $65.00 Each Thanks, Phil 925-323-9093 d21ent.com
  16. DiMarco21

    New Pro Whirlaway Housing

    New Pro Whirlaway Housing Our Pro Whirlaway housing replaces your Whirlaway Spacer and Shift Box when running a clutch or transmission for a clean look while using standard whirlaway gears. Made from beautifully machined 6061-T6 aluminum that is approximately 5 3/4" long. Fits a standard...
  17. DiMarco21

    Sloppy rudder help.

    Sorry, if I'm reading correctly that is acceptable to let the rudder grind into the rudder box while it is "bouncing on the beach" then we definitely come from two different schools of thought. A properly set-up rudder box / steering system should last years with minor upkeep. But then...
  18. DiMarco21

    Sloppy rudder help.

    Sorry, gotta disagree with you. The bottom of the rudder box should be flush with the bottom of the cav plates. This set up uses the bottom of the cav plates and rudder box to control to "up" play in the rudder.....Note the wear grooves. It should not make contact with either. There should...
  19. DiMarco21

    D21 Enterprises offering Collins Billet V-Drives

    D21 Enterprises is proud to offer Daryl Collins (toolman here on RD's) billet v-drives. The Collins is the same v-drive that was built with and distributed by the late Ron Bracksma at RBR. This proven design has been around since June 2002. It is 100% billet 6061-T6 aluminum. The 10 degree case...
Top