WELCOME TO RIVER DAVES PLACE

Search results

  1. MonkeyButt70

    [SOLD] Truck Camper for Long Bed

    Looking for a clean older Slide-In Truck Camper. I have a Ford F350 that looking to use for a part time camper. I do not plan on using it much, just a few times a year.
  2. MonkeyButt70

    Jack Plate Recommendations

    I want to install a Jack Plate on my 2021 Regency 250 DL3 with the 300 Verado. Which Jack Plate do you all recommend? The motor currently sits very low and rides wet. I want the ability to adjust as I want and not just using the bolt holes on the motor plate. I need to raise it at least 2.75"...
  3. MonkeyButt70

    Ham Radio

    Curious if there are any members that hold a amateur license? Im not a very active operator, but I do geek out once in awhile and get in and out of the hobby. I have been enjoying the DMR stuff and learning about it recently. K6FTW
  4. MonkeyButt70

    "Bring The Thunder" Your Top YouTube Shows

    Curious to what YouTube shows you watch, Im finding that Im enjoying this medium more than most traditional networks, the content is getting more professional and watchable with editing and proper sound. 1. Vice Grip Garage (Absolute Favorite, This guy hits it out of the park) 2. Finnegans...
  5. MonkeyButt70

    2021 Regency 250 DL3 - Highly Recommend

    Just bought this Regency 250 DL3 with the Mercury 300, I took it out to Elisinore on Sunday to break it in, when I purchased it from Anglers Marine they told me that you will have a hard time hearing the motor on Idle. After going through my checklist and preparing to start it, I turned the key...
  6. MonkeyButt70

    [SOLD] Bassett BBC Twisty Headers

    Brand New Bassett BBC twisty headers for V-Drive, selling all of my project parts. I will not ship , pick up local only in Orange County
  7. MonkeyButt70

    [SOLD] 1979 Runner Bottom

    1979 Flatbottom T-Deck light layup, excellent condition, no delam, comes with all the rigging pictured and Casale v-drive with whirlaway. competitive trailer. . Setup for a BBC .
  8. MonkeyButt70

    [SOLD] 1971 Camaro

    SOLD - 1971 Camaro 383 4 Speed M20 Muncie, Original Mulsanne Blue Patina paint zero rust, EVERYTHING IS NEW, 8.5 rear end with 3:42 Yukon Posi, CPP Stage 3 Pro Touring suspension all around with 4 wheel disc brakes, fully adjustable compression/rebound viking suspension with front coil overs...
  9. MonkeyButt70

    [SOLD] MIsc Nicson and Glenwood Hemi Parts

    SOLD - 354, 392 Nicson Hemi Motor plates front and rear with water pump - $650 SOLD - 354, 392 Aluminum Flywheel - $200 SOLD - 354, 392 Nicson Hemi Exhaust logs - $450 SOLD - Exhaust Snails - $200 SOLD - Exhaust Elbows un-cut and un-drilled - $150 All plus parts are plus actual shipping costs...
  10. MonkeyButt70

    [SOLD] Big Block Chevy 396

    BBC 396 / 402 motor is in good condition, rebuildable, or just freshen it up, pistons are .030 over and the cylinders still show hatch marks with no ledge. The block number is 3969854 and the heads are 3999241. The motor was removed from a 1972 Chevelle, located in Orange County, CA $750
  11. MonkeyButt70

    [SOLD] Big Block Ford 460

    BBF 460 motor, D1VE Block, D3VE Heads, Motor was running when pulled from a jet boat, carb was recently gone through and fresh oil change. Harman Marine motor plates front and rear with PTO, Located in Orange County, CA. $1750
  12. MonkeyButt70

    [SOLD] Mooneyham Blower Intake BBC

    SOLD - Mooneyham polished competition blower intake for tall deck BBC, rectangle port, has never been ported. very little use. $475 plus ride
  13. MonkeyButt70

    Misc Blower Parts

    Most of these parts have a few hours on them. Blower Snout 9 3/8" with 3" Idler - $350 Cobra dual carb air cleaner 8.5" spread - $80 BBC/SBC Greer offset with super mag - $500 Plus Ride $
  14. MonkeyButt70

    [SOLD] 2004 JC TriToon 246

    2004 JC Tri Toon (pontoon) very clean and reliable 24.6 toon boat with 350 MPI MerCruiser with a Mercury Alpha One outdrive, 329 hours always professionally maintained, toons are regularly checked for leaks or issues. Interior is very clean with no tears or rips and still very soft with no...
  15. MonkeyButt70

    Kings River - Rookie

    I will be heading to Lindys Landing @ Kings River mid August to take out my recent Kindsvater Flatbottom build and I have never been there. So any advice would be appreciated, for example... what areas in the water to avoid (are there water maps), cool destinations, do they have race fuel there...
  16. MonkeyButt70

    POLL - Lake Havasu Channel Open it or Keep it Closed?

    Curious what people think about the channel being open or closed?, for me at first I was not happy about it being closed, but I have to say it has been nice hanging out on the channel beach with beers in hand and my chair in the water on the busy days watching the boats drive by and the water...
  17. MonkeyButt70

    [SOLD] Boat Interior - Seats

    Never used - Seats for a flatbottom or whatever else they could fit. I just recently bought them locally for my project and Im going a different direction, I want to match the metal flake paint. The seats are very good quality and ready to install. Located in Orange County, CA $900
  18. MonkeyButt70

    Best Flag Pole Config for Boats?

    I want to wave old faithful off the back of my Pontoon for the memorial weekend parade on Saturday, who has the best mounts or design for building one?
  19. MonkeyButt70

    [SOLD] 2018 Dodge Demon SRT Redline

    2018 Dodge Challenger Demon with the rare Redline Red that was limited to just 130 cars for the run of production, Comfort Audio/Seat Group, Storage, Trunk Carpet, Factory Car Cover, Battery charger, Tinted windows and Drag crate that has not been opened. Also included and currently installed is...
  20. MonkeyButt70

    Build - NOS Kindsvater Flat

    I just acquired this NOS 1976 Kindsvater 19' Flatbottom from a friend. It was ordered about 44 years ago and was delivered and then sat in a warehouse and never rigged. My plan is to build this as if it was built in 1976 with just a few minor updates mechanically. I have virgin 354 Hemi that I...
Top