Search results

Posted for a few days so far in the Machinery section. Full information in that thread. https://www.riverdavesplace.com/forums/threads/diamond-m22-combination-h-v-mill.287871/post-5112988

Pulled off one of my old Spectra's many moons ago. Free to good home. Huntington Beach or Havasu. Needs a tiny bit of TIG work on the backside to repair a broken hole.

I have a 1940's Diamond M22 mill in the back of the shop that I'd like to sell, think "Bridgeport" but at 2/3 scale. Wouldn't make sense for any machine shop, but for a collector or hobbyist it would be cool. Looking for $200 or so, it's strapped to a pallet right now. I think I have a rotary...

I love smoked brisket, but have run out of ideas on what to do with it after the first couple of meals. Cubed for chili, shredded and stuffed into jalapenos, filling for an omelette, sandwiches, in a burrito or quesadilla, . . the last lb or two usually get added to the dogs dishes later in the...

Too much to do and no time to throw at a handful of projects so they need to go. This is a 1978 Jeep CJ-5 that was bought and a full rebuild started well over 10 years ago, I don't think it's been touched in over 8 years. Engine - Freshly rebuilt 304 CI AMC (Jeep) V8, forged + 0.030" 9.5:1...

Going to start assembling a motor that I had machined +10 years ago. The plastic bag I had it in tore and the humid beach air got into it, light rust across and into all surfaces. What can I add to a clean trash can or such to dip the block and crank into to remove this rust layer? I've heard...

After taking two months to recover from a fall off a ladder I've decided to not tempt fate again, instead I'm going to start selling off my two wheeled toys of year's past. This is my 2002 Husaberg FE550, it's been in the garage 15 years now as evidenced by the nearly antique green sticker...

Was tired of serving my green sauce pork butt over rice, so falling back on my Italian heritage I substituted a 1/2" thick puddle of stiffened up polenta for the rice base. The polenta deviated from the normal basics by using chicken broth, a splash of heavy cream, and a heavy dollop of a spicy...

Intake manifold, sending units, fuel injectors and rails, throttle body, . . . No computer, but I have a MegaSquirt EFI that can be purchased separately. $100, in Huntington Beach or can bring it to Havasu.

Two first Gen HEMI heads, round port, off a '54 331. Never going to use them so I just want them out of the shop, but don't want to just drop them in the dumpster or recycle them. Located in Huntington Beach.

Was pulled out when we dropped in the new 302 in my son's ranger. I'm tired of looking at it in the back of the shop. Was running fine when pulled, no ridge at the top of the bores. Located in Huntington Beach.

I saw their aluminum shelf set up on a 'toon in the channel a few months ago. I don't have a place to mount it on our deck boat in Havasu, but I bought one for our sportfisher here at the beach, this one in stainless. Very nice construction and it works just like their web site shows. I could...

A friend of one of my sons wants to buy another son's 19' Spectra, a minimal build thread here: https://www.riverdavesplace.com/forums/threads/19-spectra-twin-turbo.31283/post-442445 It only has 30 or so hours on it since the build, it just sets in the Havasu garage until a once a year day...

We're buying our presently leased 2019 MB S560, the residual is half of the car's present value. I'm looking for an extended car warranty, who's had good or bad luck with one of the aftermarket offerings out there? Thanks

For sale is a 2009 Kawasaki Teryx, the build threads can be found in the off road forum here. 2206 miles, 161 hours since new, less since the motor build. AZ street legal Large displacement EFI motor Muzzy exhaust Long Travel Industries suspension with King shocks and springs Long Travel...

This is a Wilcap adapter for a 331 Hemi extended bellhousing motor, complete with matching Mopar A-833 four speed, shifter and flywheel. $250 for all, located in Huntington Beach but can drag it to Havasu.

Selling a twin turbo PFM draw thru kit, not needed anymore. Aluminum needs to be re-polished (dull, but no pitting), the turbos rebuilt, but all is there except the log exhaust manifolds. Not shown is the blow-thru carb hat in case you want to go that route. I made an adapter to make use of...

I want to convert a older tunnel ram manifold over to port injection (EFI). I may be able to do the conversion myself, but would much prefer to find a shop experienced in this. Anybody have any recommendations? And no, I just can't find a manifold designed this way as the project engine is an...

Because of the location of our Havasu house the pool doesn't warm up until July or so unless the propane heater is used. The wind just sucks the heat out of the pool. The pool builder suggested installing a heat pump or thermal panels. Looking at our equipment I'm thinking, "but I already...

Headman Headers kit to swap in a small block Ford into an 83-97 Ford Ranger. Mounts, oil pan, headers. Located in Huntington Beach. $200 OBO