1971 19’ schiada

[Rjt01]

So building my lilttle Schiada, just wanted to show u guys my baby . Doing all the mechanical stuff then going to get the hull completely stripped down and new gel done . Sandblasted the trailer and new wiring and lights , new tanks , complete rebuild on the trans and v-drive , all new seals . Motor will be done soon . All new braided hoses with all new black An fittings ..........

 

[rightytighty]

Looks bad ass. A ton of work for sure! Alignment right on prop shaft to coupler? Probably just the picture.

 

[Rjt01]

All was straight but when I come to put it back together will be checking everything before the first firing up then check again when it’s been ran . Can’t wait to get her wet lol

 

[cofooter]

Looking forward to checking out your build!!!

 

[1homeblown]

Badass boat! I have always loved the 19’s! Hopefully I’ll see ya out there in Parker!


Sent from my iPhone using Tapatalk

 

[Rjt01]

Oh u will lol , I have been working away for work but my traveling time is up soon then I can concentrate on getting stuff done . Should be in the water in the next month or so . Then when all the mechanical stuff is good to go then I will be pulling everything out to bare hual and stripping it down to get new stringers and bulk head and do the floor the way I want it , I love this boat and intend to do it justice. I would love to find the history of this boat so if anyone knows anything about the 19’ hual pls let me know .

 

[73mandella]

I'm a Mandella guy, but that is a great looking hull!

 

[Rjt01]

Thanks bro , now I am shitting bricks smh was reading one of the older post and I came across this and I think the guys that glassed in my brackets for my new gas tanks did this

 

[Rjt01]

 

[1homeblown]

Are the tanks touching the outside of the hull?


Sent from my iPhone using Tapatalk

 

[Rjt01]

No , plenty of air gap from the back of the tank and the side of the hull , intended to put the paddles an stuff behind them lol

 

[Rjt01]

What’s killing me is I am away from home and all I want to do is work on the boat lol

 

[1homeblown]

[emoji23] I know the feeling. [emoji1303]


Sent from my iPhone using Tapatalk

 

[Backlash]

When you can, post up some updates for those of us with the same boat!! Hahahaa!!!

 

[Rjt01]

Just got back from Northern California. Got some catching up to do at the house , been gone for 36 days and need to do all the hunny to do list . Tomorrow I start work on the boat so will be posting more stuff ass I go . Been ordering parts like crazy lol it was like Xmas when I came home lol new gauges oil relocation kit .

 

[Rjt01]

Just got my prop xrayed and dye tested and passed with flying colors if anyone need that done I have a hook up for it , will have a price for it soon .

 

[Rjt01]

Got some new parts

 

[Rjt01]

Dan Olsen oil cooler been ultrasonic cleaned

Engine is almost done , heads go on today , then time to prime . Then hopefully taking it to the dyno on Thursday to brake it in .

 

[Rjt01]

V-Drive is in and transmission

 

[Rjt01]

Engine is done . 454 .40 over , clay smith cam , polished ported heads . Duel 750 dp Holley .

 

[Backlash]

It's coming along nicely! Thank you for posting the updates!!

 

[Rjt01]

Remote oil filter in and new gauges in . Next is the motor

 

[Rjt01]

 

[Rjt01]

Well another update, spent most of Saturday stabbing in the new engine and start the rigging the lines ..... only to find out that the new logs are off alignment to the transom tips and I have to relocate the battery lol but should have a fix for both over the next few days . My goal is too have this puppy fired up on Christmas Eve

 

[Rjt01]

So it’s back and running , went to the weekend at paradise and was one of 2 that ran in the crazy wind and almost sank the sled lol . Was a blast to be there and met a lot of good ppl . Will be going back next year .

 

[Rjt01]

Just got my new custom cover done , came out bitchin

 

[sintax]

who made the cover?

 

[Rjt01]

My buddy Brian Thompson he’s in chino

 

[Rjt01]

My buddy Brian Thompson he’s in chino

 

[Rjt01]

My buddy Brian Thompson he’s in chino

 

[Maestro]

How much, I need one for a raysoncraft 20'