Tahoe540
Well-Known Member
- Joined
- Aug 2, 2016
- Messages
- 355
- Reaction score
- 477
This boat has been my pride and joy now for 3 years. I have done a lot of upgrades over the past 3 years. When I bought the boat is was completely stock. I am only selling because I found my next dream boat LOL.
The upgrades I have done.
New trailer with all the upgrades (3 years old) and very few trips to the lake. It was custom made at Sport Boat Trailers in Northern California.
New gelcoat on the bottom of the boat. It had some rash from beaching it (not me).
Pump is rebuilt with droop snoop and ride plate, bowl stuffer, stainless A impeller, inducer and some new powder coating. It also has the 1350 drive shaft with a new flywheel and a hydraulic place diverter.
Motor is a BBC 555. New dart block with about 4 hours, 10:1 compression with forged Icon pistons and callies crank and rods. The heads are brodix BB2 CNC with Jesel shaft rockers. The heads have about an hour on a freshen up with new springs and valves. It has a new custom hydraulic roller Bullet cam and new Johnson lifters. It has the matching brodix intake and a 1050 (4150 base) carb. New larger 3.5” trumpet exhaust tips. Powder coated JBP rail kit. I have not had it dyno’d it.
Gel coat is a 8 out of 10. I have removed the bow rail but still have it. Interior is 7.5/8 out of 10 with new carpet. The bimini is in good shape as well. I have also installed LED boat lights this spring and has always been stored in a garage.
I have titles for both the boat and the trailer. This is a turnkey boat ready for summer. I live in Reno
25K
The upgrades I have done.
New trailer with all the upgrades (3 years old) and very few trips to the lake. It was custom made at Sport Boat Trailers in Northern California.
New gelcoat on the bottom of the boat. It had some rash from beaching it (not me).
Pump is rebuilt with droop snoop and ride plate, bowl stuffer, stainless A impeller, inducer and some new powder coating. It also has the 1350 drive shaft with a new flywheel and a hydraulic place diverter.
Motor is a BBC 555. New dart block with about 4 hours, 10:1 compression with forged Icon pistons and callies crank and rods. The heads are brodix BB2 CNC with Jesel shaft rockers. The heads have about an hour on a freshen up with new springs and valves. It has a new custom hydraulic roller Bullet cam and new Johnson lifters. It has the matching brodix intake and a 1050 (4150 base) carb. New larger 3.5” trumpet exhaust tips. Powder coated JBP rail kit. I have not had it dyno’d it.
Gel coat is a 8 out of 10. I have removed the bow rail but still have it. Interior is 7.5/8 out of 10 with new carpet. The bimini is in good shape as well. I have also installed LED boat lights this spring and has always been stored in a garage.
I have titles for both the boat and the trailer. This is a turnkey boat ready for summer. I live in Reno
25K
Attachments
-
20180811_084421 (3).jpg133.9 KB · Views: 675
-
20191223_104754.jpg303.3 KB · Views: 766
-
20200822_175126.jpg354.8 KB · Views: 729
-
20200822_175208.jpg315.6 KB · Views: 704
-
20200822_175215.jpg267.7 KB · Views: 603
-
20200823_101307.jpg86.4 KB · Views: 564
-
20210121_163030.jpg218.4 KB · Views: 555
-
20210207_123628.jpg361.1 KB · Views: 539
-
20210313_074540.jpg244.1 KB · Views: 540
-
20210328_151235.jpg283.7 KB · Views: 534
-
20210328_151241.jpg268.9 KB · Views: 518
-
20210328_151259.jpg279.9 KB · Views: 525
-
20210410_103821.jpg334 KB · Views: 512
-
20210508_160954.jpg243.9 KB · Views: 518
-
20210509_173054.jpg272 KB · Views: 492