1986 Stoker with 2000 300x Mercury Outboard

[No Butt No Putt]

1986 Stoker 20 SST
2000 300X
For Sale

Ok guys. Here’s the deal. I have the 86 Stoker for sale. Engine is a 2000 Mercury 300x. Has MAD EFI, and Simon billet oring heads. 5 cylinders are 120psi. 1 is at 100psi. It will need a hone and re-ring. Boat is very solid and clean. No rot. Nice wood floors. Very minimal stress cracks. Seastar Steering. Hydraulic jack plate. Blinker switches. New marine carpet. All new stainless allen socket threw bolted hardware. Extreme trailer.

The boat runs and drives. Just needs to be re ring and honed.

Hoffman Motorsports quoted $3500 to hone and re-ring. He thinks it’s one of his engines.

$18,000 obo the way it sits. Or,
$25,000 if I have the engine rebuilt and put new wheels and tires on it.

Sean 760-445-6643

I have California titles for boat and trailer.

Boat is in Santee Ca 92071.

No trades. Cash only.

Boat has been 116mph on race fuel and runs 102mph on 91.

Sent from my iPhone using Tapatalk

 

[Luv2gofast]

Great looking boat for an 86! That must one of the first SST Stoker made. I think I had the last Baker RST made and it was listed as an 86 although probably layed up in 85.

 

[BingerFang]

Great looking boat for an 86! That must one of the first SST Stoker made. I think I had the last Baker RST made and it was listed as an 86 although probably layed up in 85.

I have an 84 laid up by Al!

 

[No Butt No Putt]

Great looking boat for an 86! That must one of the first SST Stoker made. I think I had the last Baker RST made and it was listed as an 86 although probably layed up in 85.

Thank you. It’s very clean. I can only find 3 stress crack spots. This one is vin tagged ELB. Eliminator did this one. It’s lived in Canada for the last 8 years. Only used 2 months a year.


Sent from my iPhone using Tapatalk

 

[BingerFang]

Thank you. It’s very clean. I can only find 3 stress crack spots. This one is vin tagged ELB. Eliminator did this one. It’s lived in Canada for the last 8 years. Only used 2 months a year.


Sent from my iPhone using Tapatalk

How is the deck on this one? My 84 is pretty thin, definitely don't want to walk on it and I'm only 160lbs.

 

[stoker2001]

Thank you. It’s very clean. I can only find 3 stress crack spots. This one is vin tagged ELB. Eliminator did this one. It’s lived in Canada for the last 8 years. Only used 2 months a year.


Sent from my iPhone using Tapatalk

just FYI the molds were of coarse Al/johns custom marine,but all SST boats were laid up by Eliminator

 

[Luv2gofast]

just FYI the molds were of coarse Al/johns custom marine,but all SST boats were laid up by Eliminator

When did Al start making boats? What did he change from the Baker RST...besides the deck. My Baker was a thin hull but the deck was pretty solid. Not Lavey solid but you could walk on it.

 

[No Butt No Putt]

How is the deck on this one? My 84 is pretty thin, definitely don't want to walk on it and I'm only 160lbs.

It’s light. I have a paper that says dry weight. I’ll look for it.


Sent from my iPhone using Tapatalk

 

[No Butt No Putt]

just FYI the molds were of coarse Al/johns custom marine,but all SST boats were laid up by Eliminator

Title is ELB


Sent from my iPhone using Tapatalk

 

[stoker2001]

When did Al start making boats? What did he change from the Baker RST...besides the deck. My Baker was a thin hull but the deck was pretty solid. Not Lavey solid but you could walk on it.

Not sure when Al started?He is on FB group "stoker owners group"you can ask questions there and he will respond

 

[stoker2001]

Title is ELB


Sent from my iPhone using Tapatalk

Yes sir,Elim laid them up,hence that is why HIN# starts with ELB.FYI Al Stoker is fully retired and resides in Florida.not sure where or who has molds

 

[Flying_Lavey]

When did Al start making boats? What did he change from the Baker RST...besides the deck. My Baker was a thin hull but the deck was pretty solid. Not Lavey solid but you could walk on it.

Who tooled the stoker deck? The rear half is very different from the RST deck of the Baker.

Sent from my SM-G973U using Tapatalk

 

[Luv2gofast]

Who tooled the stoker deck? The rear half is very different from the RST deck of the Baker.

Sent from my SM-G973U using Tapatalk

Yes much more conventional than the rounded off baker. Also notched the center pod at the transom and I think made some other changes to the center pod.

 

[No Butt No Putt]

Bump. Will sell just the engine for $7000


Sent from my iPhone using Tapatalk

 

[rivermobster]

Who tooled the stoker deck? The rear half is very different from the RST deck of the Baker.

Sent from my SM-G973U using Tapatalk

Pretty sure Eliminator made all the hulls for Al.

Great looking boat.

 

[Flying_Lavey]

Pretty sure Eliminator made all the hulls for Al.

Great looking boat. [emoji106]

Yes they did, but did Eliminator tool the deck mold?

Sent from my LM-G710VM using Tapatalk