WTR&PWR
Well-Known Member
- Joined
- Mar 14, 2021
- Messages
- 890
- Reaction score
- 1,468
Last edited:
Is this the correct forum to list it? Posted it yesterday and no action thought it’d be a hot ticket.Someone needs to pick this up.
Pictures addedI’m surprised it’s not gone already.
It was his wife’s ride so she drove it all around the camp but never went on long rides. Obviously it needs some TLC hence the priceHow can it have 124 hours and only 900 miles on it.
this thing looks beat up.
It was his wife’s ride so she drove it all around the camp but never went on long rides. Obviously it needs some TLC hence the price [emoji849]
A good cleaning. Driver seat is torn and could use a new canvas for the roof. Fenders are a bit torn up.What’s the TLC entail? Mechanical? Or just a good cleaning?
Sent from my iPhone using Tapatalk
Well…I see that this thread is going to take a turn…I decided to keep the car and do some TLC to it and just leave it at the river once I’m done. Woke up this morning and bought tires and wheels for it. Came home and started cleaning it for the 3rd or 4th time since I bought it a few months ago. It was covered in mud and I decided to remove skid plates and do a “deep cleaning” to once and for all get rid of all the deep caked on mud up underneath. Well one thing turned into another and I started removing the beat up and cracked plastics and finding more mud and rocks. I need to replace the bed so the cage had to come off at some point. Why not now? Right? Well here I sit with a tore down car and a new thread of me building this thing. I found a cage and doors I want to use but wondering what y’all think as far as plastics? The old ones are thrashed. I don’t mind spending some money and doing something aftermarket but don’t want to go too wild on a 6 year on non turbo car. Any suggestions for body panels etc welcome!
View attachment 1040970 View attachment 1040971 View attachment 1040972 View attachment 1040973
Thanks. What is the purpose of them?Do the sway bar mount gussets while you have it torn down to that point! I chose the cognito ones.
Cognito Sway Bar Frame Mount And Gusset Kit For Polaris RZR 14-19 XP 1000 / 16-19 XP Turbo / 18-21 Trails and Rocks
Each Kit Features:High-grade steel constructionCNC cut and formedCompletely replaces damaged mountsIncludes new grease fittingsMade in the USAcognitomotorsports.com
I am doing a full color swap/build on a 2021 Turbo S 4 velocity, I will have a lot of plastics for sale once I start it. Hood, front and rear fenders, stock doors minus latches, front fascia ect, shoot me a PM if you want to try and work a deal. Fenders are black with radar blue graphics (graphics can be pulled) and the hood it radar blue, I also have a performance red hood.Well…I see that this thread is going to take a turn…I decided to keep the car and do some TLC to it and just leave it at the river once I’m done. Woke up this morning and bought tires and wheels for it. Came home and started cleaning it for the 3rd or 4th time since I bought it a few months ago. It was covered in mud and I decided to remove skid plates and do a “deep cleaning” to once and for all get rid of all the deep caked on mud up underneath. Well one thing turned into another and I started removing the beat up and cracked plastics and finding more mud and rocks. I need to replace the bed so the cage had to come off at some point. Why not now? Right? Well here I sit with a tore down car and a new thread of me building this thing. I found a cage and doors I want to use but wondering what y’all think as far as plastics? The old ones are thrashed. I don’t mind spending some money and doing something aftermarket but don’t want to go too wild on a 6 year on non turbo car. Any suggestions for body panels etc welcome!
View attachment 1040970 View attachment 1040971 View attachment 1040972 View attachment 1040973
Sounds good I haven't heard anything from him, I also realized the hood/dash is different on his car so there would be a small hole showing on each side of the front fenders. Shoot me a PM to discussI would be interested in your plastics if he decides to pass. Picked up a used Velocity that needs some work.
Go for it guys I have been able to find the body panels I need.Sounds good I haven't heard anything from him, I also realized the hood/dash is different on his car so there would be a small hole showing on each side of the front fenders. Shoot me a PM to discuss
Thanks for the reply.Will send you a pm when I figure out how to. Give the RDP inmate first opportunity. Thanks