Don Batman
Active Member
- Joined
- Aug 11, 2019
- Messages
- 26
- Reaction score
- 14
Was going to do a simple oil change on them . Took them apart and all oil levels were 3" down. Never had any leaks. Definitely not full. All Reservoir IFP pistons jammed down in the bottom. Needed to blow them out by pressurizing the shock body. Cannot find any information on these guys. E mailed Fox - no reply. No way to pull them up to adjust height if pushed in too far that I can see. I filled reservoir then pushed oil down and left 2" cushion. Filled shock to 2" from top. Figured that piston / valving / bumper - etc. would raise oil level enough so that the cushion I left in the reservoir would keep the IFP piston off o the bottom. Any advice - other than " Keep out rookie " ?
Thanks
Don Batman
Thanks
Don Batman