Roy had those done, same guy that was doing the RPM’s for Joe Malich. Very similar to the Eliminator look but go look at the RPM’s and you’ll really see it.
So than i take it it’s not the same interior Roy already had done for the boat.
Specially with that huge tunnel, but I’d still give my left but to run it, or better yet own it.
I thought the same, Kinda. Think they just built a 27 also. Not saying that I’d run around at 130 all day but that skater should be able to handle it if any hull willEliminator built a 25 with twin 450s. 28 ft seems reasonable lol
I know that i was told by Roy that Peter from Skater was pretty adamant not to. But to each there own, i have a feeling this bitch is going to look like a flying saucer coming at you on the water as wide as it is.
I’d like to change my vote based on new info.
. I’ll go on a limb and say he knows what to expect from the massive tunnel. Thing is gonna be a blast to drive though.
Yes, sadly he passed away before being able to finish it
Yea @getreal Roy was one of a kind and had many boats and his plans were never going to be like anyone else’s. He was also a great machinist with some crazy one off plans for everything he’d come up with a plan and then just do it.
I agree with you. I'm sure the hull is more than strong enough, it's the balance and the angle and the amount of lift that might cause problems. Eliminators run very flat at speed and probably don't create nearly as much lift.
Absolutely beautiful.
Did Rick Bowling finish it?
I’m not sure, he doesn’t post much on his instagram and that’s the only place I’ve gotten the photos and little info I’ve shared from.
He has great taste in boats. This turned out so bad ass.
