WELCOME TO RIVER DAVES PLACE

522 BBC 9.8 built for boost

AZLineman

Adjusting to retired life
Joined
Oct 29, 2008
Messages
2,095
Reaction score
2,677
Like the title says. This recentlycame out of my 21RC. Gen 5 HP500 blue motor block and crank. Dart pro one 345 heads, eagle h beams, JE, etc. Solid roller built by Larry and made 914 on the dyno with only 4 pounds of boost/pump gas. Will easily make more with good fuel/more boost. I ran my PSI on it for a while at 9 pounds on AV. Low compression (8.2ish) and just compression tested this last week all cylinders at 120. Basically long blocked. Comes with flex plate, imco timing cover for magna flow or not (has a cap if not used) and balancer. Has IMCO VC's. All ARP. No pan (wasn't sure what I was gonna use it on or in) any other questions PM me and I'll send you my phone number. Currently in Tucson but willing to haul towards Havasu/river or Phoenix area with deposit.
9k
 

Attachments

  • IMG_1529.jpeg
    IMG_1529.jpeg
    1.9 MB · Views: 0
  • IMG_1528.jpeg
    IMG_1528.jpeg
    2.1 MB · Views: 0
  • IMG_1551.jpeg
    IMG_1551.jpeg
    1.6 MB · Views: 0
  • IMG_1550.jpeg
    IMG_1550.jpeg
    1.6 MB · Views: 0
Last edited:

AZLineman

Adjusting to retired life
Joined
Oct 29, 2008
Messages
2,095
Reaction score
2,677
Well this one's getting fitted up with a Brummitt T turbo set up for the new owner and the funds from it will finish up my big chief build. My deal was done but we had a little issue with the stud anchors pulling out under boost so it was taken back apart and I decided to go with a new dart pro block that runs 10 studs per side for the heads. It will help with the 18° pro stock Pontiac heads Im using on this set up
 
Top