Ddog01
Active Member
- Joined
- Oct 5, 2017
- Messages
- 41
- Reaction score
- 20
BBC gen6 540
Eagle forged crank and H beam rods
Mahle flat top pistons
~ 9.8:1 comp.
Hyd. roller cam (Teague 139661)
Johnson short travel lifters
ATI super damper
GM bow tie heads, ported
Victor jr. intake
Billet carb shop 950
This was a new build in May 2021.
Approx. 9 hours run time before removing to sell boat.
$10k
SBC 350
GM forged crank and rods
Mahle pistons
9.6:1 comp
Roller cam
GM bow tie heads with rough casting marks cleaned up, not ported
Rotating assembly balanced
This is an all original gm 604 circle track engine. Factory rated 404 hp @ 5600. Easy to search and find all information about it. Recent freshen up and has not been started since. This would also be a good boat engine with marine compatible cam specs.
$5500
Eagle forged crank and H beam rods
Mahle flat top pistons
~ 9.8:1 comp.
Hyd. roller cam (Teague 139661)
Johnson short travel lifters
ATI super damper
GM bow tie heads, ported
Victor jr. intake
Billet carb shop 950
This was a new build in May 2021.
Approx. 9 hours run time before removing to sell boat.
$10k
SBC 350
GM forged crank and rods
Mahle pistons
9.6:1 comp
Roller cam
GM bow tie heads with rough casting marks cleaned up, not ported
Rotating assembly balanced
This is an all original gm 604 circle track engine. Factory rated 404 hp @ 5600. Easy to search and find all information about it. Recent freshen up and has not been started since. This would also be a good boat engine with marine compatible cam specs.
$5500
Attachments
-
0F32B208-5619-4FBE-A0BF-1C814E2D71F7.jpeg564.6 KB · Views: 76
-
98F93CDB-B5D0-440A-AA57-D133656F066B.jpeg574.2 KB · Views: 66
-
3229B666-71D2-4F59-83E5-23AEE3070CD1.jpeg496.3 KB · Views: 65
-
01869782-FA40-452E-A503-8EB347885116.jpeg509.9 KB · Views: 76
-
D5478B59-7518-45EE-A8E9-82C24E18A2CF.jpeg466.1 KB · Views: 66
-
03A7F3B8-8EBF-4B89-A0C1-01AFC8F75788.jpeg456.4 KB · Views: 68
-
F5DC8CA1-168E-4C1A-814C-8C97AFD053C0.jpeg457.1 KB · Views: 69