[WTB] BBC Cylinder heads

[guest hs]

Anything out there?

 

[78Southwind]

What are you looking for?

Sent from my SM-N986U1 using Tapatalk

 

[Joepump]

AFR 305’s

 

[guest hs]

Open chamber rectangle port cast iron or aluminum

 

[Bugginout]

I have a set of 990's in the garage that need to be rebuilt. I believe they are in good condition. Need surfacing and a valve job. If you need them to get going for the summer they are yours.

 

[Joepump]

...

 

[guest hs]

I have a set of 990's in the garage that need to be rebuilt. I believe they are in good condition. Need surfacing and a valve job. If you need them to get going for the summer they are yours.

What’s your location ?

 

[78Southwind]

@Joepump Why are you getting rid of the 305's? Are you going with bigger heads?

Sent from my SM-N986U1 using Tapatalk

 

[Bugginout]

What’s your location ?

Palm desert

 

[Bugginout]

Palm desert

(562)321-0199 my name is Kelley

 

[guest hs]

(562)321-0199 my name is Kelley

Let me see if I can get someone to bring them to Havasu Thank You

 

[Joepump]

@Joepump Why are you getting rid of the 305's? Are you going with bigger heads?

Sent from my SM-N986U1 using Tapatalk

I bought a blower motor. I’m parting out my old motor.

 

[78Southwind]

I bought a blower motor. I’m parting out my old motor.

Ok, sounds good. I was looking to possibly trade some Canfield 350 for something smaller to fit a future build better.

 

[Bugginout]

Let me see if I can get someone to bring them to Havasu Thank You

Your welcome. Pay it forward sometime to someone.

 

[guest hs]

Still looking for one 990 or a set of rectangle port open chamber cylinder heads.

 

[GGAMBLE]

Dart race series finished by Gellner eng.

 

[guest hs]

Dart race series finished by Gellner eng.

How much,

 

[GGAMBLE]

They need to be gone through nothing wrong but I’d freshen them up. How bout 1750 plus the ride

 

[guest hs]

That’s a bit out of my price range especially if they need a valve job

 

[Bugginout]

Looks like you would have to run shaft rockers with those darts?

 

[GGAMBLE]

I ran standard crane gold rockers

 

[Bugginout]

Thank you

 

[wzuber]

Dart race series finished by Gellner eng.

I'm interested. Contact info. And spec sheets avail? Have they ever been weld repaired etc.? Runner volumn valve sizes? So many Q's.

 

[wzuber]

I have a set of 900's, 840's & 780's. Take your pick.

 

[varmit86]

They need to be gone through nothing wrong but I’d freshen them up. How bout 1750 plus the ride

Where are you located and can you post the cc vol, valve size, runner size etc?

Sent from my SM-G930P using Tapatalk

 

[greg shirley]

call me at 6614005011 thanks