WELCOME TO RIVER DAVES PLACE

Bravo Ones for Borrow

FROGMAN524

Well-Known Member
Joined
Mar 16, 2013
Messages
4,880
Reaction score
8,339
Anybody got two 34 or 36" Bravo Ones I could try out? Just want to compare to my Maximus 32 and 35s. Prop shaft is 1 7/16" so can I use my prop hub adapters or do I need different ones for Bravo Ones?
 

Runs2rch

Well-Known Member
Joined
Jun 10, 2013
Messages
9,455
Reaction score
9,445
Save your time. They aren't going to work.
 

Runs2rch

Well-Known Member
Joined
Jun 10, 2013
Messages
9,455
Reaction score
9,445
Too much slip? How about removing PVS plugs on 35 Maximus? Would that help with plane time?


Sent from my iPhone using Tapatalk
PVS system only works with through hub exhaust.

The boat with the 32's rolled up on plane fine. Had to drive it though. 3800-4k and just let it roll out. With a little tab.

I'm guessing with the added power and 35's it should be similar. It isn't a light boat, so won't be a rocket out of the hole.
 

FROGMAN524

Well-Known Member
Joined
Mar 16, 2013
Messages
4,880
Reaction score
8,339
No issues with 32s getting in plane and have yet to test 35s. Finding best trim at WOT is what I’m shooting for before trying the bigger wheels. Right now I’ve tried both +2 and +3. Going to try neutral and +1 as well.


Sent from my iPhone using Tapatalk
 

Runs2rch

Well-Known Member
Joined
Jun 10, 2013
Messages
9,455
Reaction score
9,445
No issues with 32s getting in plane and have yet to test 35s. Finding best trim at WOT is what I’m shooting for before trying the bigger wheels. Right now I’ve tried both +2 and +3. Going to try neutral and +1 as well.


Sent from my iPhone using Tapatalk
It will always vary. Load in boat, fuel, weather/water conditions.

No one size fits all. You drive the boat for the conditions.
 

JD D05

Well-Known Member
Joined
Apr 1, 2013
Messages
8,746
Reaction score
13,266
I would bet our boats are pretty similar. I run 30's only now. The 32's really don't work at Powell unless I am loaded light. Havasu only.
 

Runs2rch

Well-Known Member
Joined
Jun 10, 2013
Messages
9,455
Reaction score
9,445
I would bet our boats are pretty similar. I run 30's only now. The 32's really don't work at Powell unless I am loaded light. Havasu only.
You are probably right. The non vented Heat bottom probably rolls out a little faster I bet.
 

FROGMAN524

Well-Known Member
Joined
Mar 16, 2013
Messages
4,880
Reaction score
8,339
I would bet our boats are pretty similar. I run 30's only now. The 32's really don't work at Powell unless I am loaded light. Havasu only.

What gear ratio do you have again? I’m still 1.5 after SCX conversions.


Sent from my iPhone using Tapatalk
 

Jmp

Well-Known Member
Joined
Jun 2, 2014
Messages
476
Reaction score
533
what boat are you running these on?
 

FROGMAN524

Well-Known Member
Joined
Mar 16, 2013
Messages
4,880
Reaction score
8,339
Hallett 335

IMG_3406.jpg



Sent from my iPhone using Tapatalk
 

28Eliminator

Well-Known Member
Joined
Feb 10, 2011
Messages
11,308
Reaction score
11,058
PVS system only works with through hub exhaust.

The boat with the 32's rolled up on plane fine. Had to drive it though. 3800-4k and just let it roll out. With a little tab.

I'm guessing with the added power and 35's it should be similar. It isn't a light boat, so won't be a rocket out of the hole.

Not True. The PVS plug holes will still ventilate enough to crate slip getting on plane whether you have through hub exhaust or not.
 
Top