Care package this morning, zero dark thirty.

[wsuwrhr]

A whole mess in various sizes of 304Stainless and 360 brass round bar and even a couple hex sizes. All destined for the bar feeder. Mostly lathe work, some threading and a few of the parts get mill work.

Back to work.

Brian


Happy now?

 

[wsuwrhr]

1-3/8 part in first.

 

[wsuwrhr]

 

[ChumpChange]

Awesome!

 

[wsuwrhr]

Had to let the lathe sit fallow for a couple days, had some other things to handle, back on it again.

Hey, good news is in this deadasssection is it isn't hard to find the thread again. lol

Course the bad news is, I'm largely talking to myself in here.

 

[wsuwrhr]

Part bored ready to be parted off.

 

[wsuwrhr]

 

[wsuwrhr]

Im running this in the ST Haas chattermeister lathe so I can bar feed the stock.

The other side will get threaded 2nd operation on the Mori. I don't need any issues.

 

[wsuwrhr]

"You can machine small parts in big machines"

 

[wsuwrhr]

 

[wsuwrhr]

 

[wsuwrhr]

Couple more shots of the first operation.

 

[wsuwrhr]

I had to bump the thread to the top again so I could find it. I am getting some more pictures of the parts ready.

Brian

 

[wsuwrhr]

3.5 dia SS stock.

A little dangerous with the overhang.

First couple parts are scary.

 

[wsuwrhr]

Drilled

 

[wsuwrhr]

OD roughed

 

[wsuwrhr]

OD and ID finished

 

[wsuwrhr]

Big OD groove.

 

[RaceTec]

Looking good man! I am just here designing parts today, no chips flying for me...

 

[wsuwrhr]

Looking good man! I am just here designing parts today, no chips flying for me...

Not coming out here? I was hoping we were going to meet up.

 

[RaceTec]

I am hoping to, my servers did an update and shut the entire shop down... Got them back up finally, so now I have to finish my work... Hoping to make it out a little later though!

 

[Backlash]

So Big B, whatcha making? Can you share any details?

 

[wsuwrhr]

Don't have many details, this one is wide open though, no real proprietary IP.

304SS fittings for fluid transfer.

Brian

So Big B, whatcha making? Can you share any details?

 

[wsuwrhr]

 

[wsuwrhr]

1-1/16 -16 pitch thread on the Mori.