Fire pit help

[Rsqfxr]

The wife built this fire pit but we need the top finished, located in Eastvale

Id like it to look similar to this

Sent from my iPhone using Tapatalk

 

[HTTP404]

Cap it with some pavers.

 

[Gelcoater]

The wife built this fire pit but we need the top finished, located in Eastvale
View attachment 945809

Id like it to look similar to this
View attachment 945811


Sent from my iPhone using Tapatalk

Weist rental off Pierce and the 91 has various stamped cement caps and such, fire glass, etc. Looks like she did the hard part.

 

[Bobby V]

This is who is making my caps.

Home - Pacific Stone Design, Inc.

www.pacificstone.net

 

[Havasu blue label]

hard part is done

 

[BUDMAN]

Dude. That turned out awesome. I built mine and really screwed up the top. I want to re-do the whole thing now.

 

[Javajoe]

You would need a concrete guy for that look. Same as pool coping

 

[HOOTER SLED-]

Try Thompsons in Fontucky

 

[F.U.IRS]

Try Thompsons in Fontucky

This, they have everything

 

[JB in so cal]

Wait! Your wife built that? WIinner!

 

[NicPaus]

Line that inner block with fire brick. The cinder block will pop with high heat and moisture trapped in them.

 

[LHC Kirby]

THIS

 

[Icky]

Try Thompsons in Fontucky

X3, if you go the design center in the back they can make it different colors and different finishes. Although it might be cheaper to have some pour that in place.

 

[Melloyellovector]

Fire brick inside
Remove that flex gas line, do no use flex!
And see your own pics to do pour in place, Stone needs to be removed
No easy way to set form now with stone wrapping the top, cap should have been done first, then stone
Stegmeier forms that don’t need wood on outside still need flat surface to mount to,so they won’t work either.
Did you add drain inside so it doesn’t fill with water when it rains?
If she built over existing deck drain ( possibly since it looks like control joints center under firepit) will deck drain or flood now?
Only option now is buy precast. Since she used radius block should be able to find cap to match radius.
And yes if in eastvale, Thompsons in Fontana or resource in chino

Otherwise looks like she does decent work, good job

 

[DLC]

The finished Cap that you posted is a poured in place concrete cap

in order to do that a layer or 2 of the stone your wife installed needs to be removed to set forms to hold the concrete cap in placed while the cap is poured.

you have several to choose from

1- pour a concrete cap like you posted
2-buy a pre cast cap - with this you need to make sure your block diameter match the cap diameter
3- use a non square stone / granite cap like a flagstone or a type of paver chipped to fit the diameter of the ring

 

[DLC]

precast type cap many styles colors shapes to choose from

 

[DLC]

Flagstone pavers style cap

 

[Carlson-jet]

Take a Hammer drill and make a bunch of holes 1/2" about 5-6 inches down from the top in the open spaces not filled with concrete. Repeat at the bottom on the inside.
Fuel needs a good oxygen source to burn clean. Once you get a good bed of coals stack the wood a few inches away from the outside perimeter.

I Can't stand stinky fires. Not rocket science by any means.

 

[2Driver]

Line that inner block with fire brick. The cinder block will pop with high heat and moisture trapped in them.

That was first thing I noticed. Also don’t use any old rock it has to be for fire like lava rock. Our neighbors grenaded and it was pure luck no one was injured.

 

[Rsqfxr]

Thanks, a lot of good info here, they sold her that flex, I planned on hard plumbing it, we had a drain and gas line installed there when we had the pool built


Sent from my iPhone using Tapatalk

 

[FreeBird236]

Also don't pour concrete in the bottom, it might blow up too.

 

[Maestro]

Call Martin from rescue maintenance, he'll bang out what you need done.

 

[Inland Air Balance]

Resource building material in Chino will have everything you need to do that pit right.

 

[HOOTER SLED-]

Thanks, a lot of good info here, they sold her that flex, I planned on hard plumbing it, we had a drain and gas line installed there when we had the pool built


Sent from my iPhone using Tapatalk

You can get a pre fab fire ring to replace that flex line.