Fuel Wheels on Denali HD

[FROGMAN524]

So does anyone think running a Fuel Wheel on my stock 2020 Denali HD with stock size 275/65R20 Ridge Grapplers would be an issue? Stock wheels are +47 offset and Fuels only come in a +1 which is the issue.


Sent from my iPhone using Tapatalk

 

[FROGMAN524]

I should also mention I don’t want to jack up the torsion bars or trim anything. Fuel Rebel 8 in a +1 or Fuel Anza in a +20. Both would be anthracite.


Sent from my iPhone using Tapatalk

 

[RVRKID]

THe Anza's are disco'd but the Rebels are available, with the 0 offset you might have to do some minor trimming but nothing too bad.

 

[FROGMAN524]

Wheel wells are big so we’ll see. Again, with stock size tires I’m thinking I might get away with it. And you’re right discount tire called me back to say the Anzas are discontinued. Unfortunately all of these wheel manufacturers make very limited offsets and they’re usually 0 to -70


Sent from my iPhone using Tapatalk

 

[shippingguy]

Wheel wells are big so we’ll see. Again, with stock size tires I’m thinking I might get away with it. And you’re right discount tire called me back to say the Anzas are discontinued. Unfortunately all of these wheel manufacturers make very limited offsets and they’re usually 0 to -70


Sent from my iPhone using Tapatalk

I don’t think you will have an issue! I have my 2016 with the CST 4.5” lift. I run the 20x9 XD HOSS II 0 offset and 37’s. I had to trim MINIMAL and you would not be able to even tell. The new trucks have way bigger wheel wells.

Pic was when I had the Bucks on it. Same wheel specs I mentioned though.

Sent from my iPhone using Tapatalk

 

[FROGMAN524]

I don’t think you will have an issue! I have my 2016 with the CST 4.5” lift. I run the 20x9 XD HOSS II 0 offset and 37’s. I had to trim MINIMAL and you would not be able to even tell. The new trucks have way bigger wheel wells.

Pic was when I had the Bucks on it. Same wheel specs I mentioned though.
View attachment 913455


Sent from my iPhone using Tapatalk

Ok thanks. I had a 2016 with a cognito 4-6 and 35.5x13s. Forget the offset but I think it was 0. Still had to trim even at 5.5 inches cranked.

Got the wheels and DT KO2s, instead of the Ridge Grapplers, coming in next week to try out. If they stick out too far and look stupid I’ll leave it stock.

Heading to discount in a little b it to try out the raceline clutch wheels I ordered in. They’re +18 so we’ll see if they fit.


Sent from my iPhone using Tapatalk

 

[Joe mama]

Post pic’s when you get R done.

 

[shippingguy]

Ok thanks. I had a 2016 with a cognito 4-6 and 35.5x13s. Forget the offset but I think it was 0. Still had to trim even at 5.5 inches cranked.

Got the wheels and DT KO2s, instead of the Ridge Grapplers, coming in next week to try out. If they stick out too far and look stupid I’ll leave it stock.

Heading to discount in a little b it to try out the raceline clutch wheels I ordered in. They’re +18 so we’ll see if they fit.


Sent from my iPhone using Tapatalk

Yeah crazy! My torsions are not even touched on mine! 37/12.5/20 on 0 offset 20x9. Weird how different
Trucks can be even same year and models.

+18 YOU SHOULD HAVE ZERO ISSUE!


Sent from my iPhone using Tapatalk

 

[Lord M((Squared))]

This is my 2020 GMC Denali 3500 HD. 4" CST lift with fuel 20x9's on 37's with only minor trimming. Wheel Offset is 0. As far as ride and turning radius., you'll be very happy.

 

[FROGMAN524]

Yeah crazy! My torsions are not even touched on mine! 37/12.5/20 on 0 offset 20x9. Weird how different
Trucks can be even same year and models.

+18 YOU SHOULD HAVE ZERO ISSUE!


Sent from my iPhone using Tapatalk

Wheels were perfect on the trailer, same offset as current weld egos but the caps didn’t fit. Hey make spacers for the 8 lug caps but not the 6 lug. Sent them back and am keeping the forged evos.

We’ll see how the truck looks next week with the field and KO2s


Sent from my iPhone using Tapatalk