MeCasa16
Well-Known Member
- Joined
- May 29, 2018
- Messages
- 1,593
- Reaction score
- 3,172
It’s a 1978 spectra 24. My wife was pulling me on the foil, and while adjusting the trim tabs, the old switch broke off in her hand.
That was the thread we started pulling on. Now it’s a whole new dash, switches, a vessel view and hydraulic lift for the engine hatch. We decided to re wire the whole boat and try our best to improve everything. We also had an issue where we could smell fuel when we filled it up. After ripping out the interior and getting to the tanks, I think we found our problem. There are pieces of rubber hose between the filler and the tank. They seem to have deteriorated.
We loosened up those clamps before I took the Pic. I’m fabricating a new dash now and will cover everything up front with new vinyl. We had a new interior made this spring so everything will match once we are done.
Hopefully this won’t take us too long to get finished.
We loosened up those clamps before I took the Pic. I’m fabricating a new dash now and will cover everything up front with new vinyl. We had a new interior made this spring so everything will match once we are done.
Hopefully this won’t take us too long to get finished.