LED light bar

[blt4spd2]

Anyone have any connections to have a 52" radius installed on the roof of a Toyota Tundra. Thanks.

 

[AZKC]

You just need the Lightbar or Installation or Both? And are you stuck on the Rigid Brand? Our company does this kind of stuff in AZ :thumbup:

 

[RiverDave]

Take it to wired for sound if in ca.. 951-696-2200

 

[RiverDave]

You just need the Lightbar or Installation or Both? And are you stuck on the Rigid Brand? Our company does this kind of stuff in AZ :thumbup:

What lights does your company have?

 

[rivrrts429]

Take it to wired for sound if in ca.. 951-696-2200

I didn't see them in the advertisers sticky?

I'm sure these guys could do it...

 

[AZKC]

What lights does your company have?

Deal mostly in Emergency Vehicle stuff. Have access to just about everything. Federal Signal and Whelen are what we use mostly. Feinex is something we are looking at distributing. Made in the USA. As is Whelen.

 

[RiverDave]

I didn't see them in the advertisers sticky?

I'm sure these guys could do it...


View attachment 376498

. Just an FYI Adam has been an advertiser on RDP forever as well. He doesn't run banners though. It is a different form if exposure via builds, articles etc.. LGE is a great shop to work with as well. I dropped the WFS bane because I was on the phone with Adam when I was reading the post. 9/10 times for things like this I always refer CTS.

 

[RiverDave]

Deal mostly in Emergency Vehicle stuff. Have access to just about everything. Federal Signal and Whelen are what we use mostly. Feinex is something we are looking at distributing. Made in the USA. As is Whelen.

Can you get strobes?

 

[blt4spd2]

You just need the Lightbar or Installation or Both? And are you stuck on the Rigid Brand? Our company does this kind of stuff in AZ :thumbup:

Sorry. I forgot to say that I lve in so. Cal.

 

[Tommy Gun Images]

I just happen to be having a cocktail with Alan from Baja Designs... They make a bitchin radius bar :thumbup:

 

[RiverDave]

I just happen to be having a cocktail with Alan from Baja Designs... They make a bitchin radius bar :thumbup:

Nice tell him I need some lights for my ranger..

 

[Tommy Gun Images]

Nice tell him I need some lights for my ranger..

What do you want RD?

 

[Outdrive1]

I just happen to be having a cocktail with Alan from Baja Designs... They make a bitchin radius bar :thumbup:

Did he tell you how thankful he is that RD invented the radius?

 

[Tommy Gun Images]

Did he tell you how thankful he is that RD invented the radius?

He was more excited about RD inventing light...

 

[CampbellCarl]

What do you want RD?

His normal expectation is jobber less 100%.......

 

[Abc123]

Go to CTS. Louie is the man. :thumbup:

I wouldn't go anywhere else, even if it saved me money. Best shop in So Cal.

 

[RiverDave]

His normal expectation is jobber less 100%.......

Carl if your really doing it right you actually get paid to run people's equip.. Lol. I haven't figured that part out yet, so I'm not as bad as some. Lol

 

[Carlson-jet]

My Brother in law owns Xoskel off road. His website says they are expanding to Toyota. There might be something in the works. Worth an email.

http://xoskel.com/

 

[crzy2bealive]

I'm getting my 54" since I was on a group buy on tundra talk

 

[COCA COLA COWBOY]

Take it to wired for sound if in ca.. 951-696-2200

Ummm, I wouldn't do that! I'd be more than happy to show you many pictures of what they hacked on many of their past clients.

 

[Parker Dreamin]

Question -

do these need to have a cover on them while driving around town, with them being above the stock headlights.

 

[RiverDave]

Ummm, I wouldn't do that! I'd be more than happy to show you many pictures of what they hacked on many of their past clients.

I have known Adam for 17 years.. He has done stereos in just about every toy I have ever had since I was 21. I have never had an issue with any of his installs, and I have recommended him to 100's of board members over the years, and I haven't ever heard a complaint. If there's something wrong, I'd suggest taking it back, and he will make it right.

RD

 

[linus3]

You have also referred Dirty Deeds (Tim) who is maybe the biggest crook in town. Work ethic sucks, a liar and a thief. You should be more careful of who you refer here Dave......

 

[COCA COLA COWBOY]

I have known Adam for 17 years.. He has done stereos in just about every toy I have ever had since I was 21. I have never had an issue with any of his installs, and I have recommended him to 100's of board members over the years, and I haven't ever heard a complaint. If there's something wrong, I'd suggest taking it back, and he will make it right.

RD

I'll agree to disagree on this one. I will say you're the first to provide a positive review of his work though. Right after I took my boat there a professional motorcycle racer partner told me I just made a huge mistake and Adam hacked his car. When I received my boat it was nothing like what was discussed, but it was the season and I wanted to use my boat. Since then, I fixed most of the mistakes and it actually sounds good now. Adam's boat stereo was nice though...talk about bait and switch. There is a guy just around the corner from his shop that does good work though.

 

[djunkie]

Question -

do these need to have a cover on them while driving around town, with them being above the stock headlights.

I was wondering the same. I see a lot of trucks with them now.

 

[Warlock1]

Hmmm I need a light bar for the razr more than I need one for the Tundra, But I bet a Tundra looks bad ass with one, dammit I need to make more money:grumble:

 

[fishing fool]

Here you go, Manxman has great deals.

2014 revised pricing

Dual row 3 watt led's
6" = 2880 lumen overall width= 10 5/8" $120 ea.
12"= 5760 lumen overall width= 16 5/8" $170 ea.
20"= 7200 lumen overall width= 24 1/2" $225 ea.
30"= 14,400 lumen overall width= 34 3/4" $300 ea
40"= 16,000 lumen overall width= 44 3/4" $400 ea
50"= 18,000 lumen overall width= 52 1/2" $495 ea

Dual row curved
20" 4" arch, 22 1/8" end to end, 23 1/2 on center mount $260
30" 4 1/2" 32 1/8" end to end, 33 1/2 on center mount $350 2
40" 5" arch, 42 1/8" end to end, 43 5/8 on center mount $470
50" 5 3/4" 50 1/4" end to end, 51 1/2 on center mount $525

Single row 5 watt leds
10'' 30w 2400 lm $130 ea
20'' 60w 4800 lm $210 ea
30'' 90w 7200 lm $285 ea
40'' 120w 9600 lm $375 ea


MISC lights

16 watt (4 led)cubes $50
18 watt (6 led)cubes $60
18 watt flush mount $65
42 watt 4.625" round $70

wire harness kits $20
All light use Cree led's and are servicable
IP65 and IP67 rated
30,000 hour life span
6k color temp
color lens options available (amber,red, blue, green,ect) from $8 to $15 depending on size.
Call with any questions (760)802-6040
ask for Scott
also have HIDS, call for more info

 

[mbrown2]

In reading some of the jeep forums, seems there is huge markup on these now by the named brands....It looks like you can get Cree versions, right watt LED's versions for more than 50% off of what Rigid is selling them for and even lower than the guy advertising on here...there are highly rated sellers selling 2yr warranty 52" curved flood spot combo's on Ebay for around $300 vs 525 for a 50 inch curved version being advertised above. Think I would do some searching on reputable ebay versions...even guys test and demo them on utube....$200 save is signficant considering they are all made in China and if you are getting the correct LED's, reputable seller with a warranty think I would save the money.

 

[WildHorses24]

In reading some of the jeep forums, seems there is huge markup on these now by the named brands....It looks like you can get Cree versions, right watt LED's versions for more than 50% off of what Rigid is selling them for and even lower than the guy advertising on here...there are highly rated sellers selling 2yr warranty 52" curved flood spot combo's on Ebay for around $300 vs 525 for a 50 inch curved version being advertised above. Think I would do some searching on reputable ebay versions...even guys test and demo them on utube....$200 save is signficant considering they are all made in China and if you are getting the correct LED's, reputable seller with a warranty think I would save the money.

What he said😄^^

I just found a 50" straight bar for $165 shipped right from the republic with warranty.... Identical to the rest of the $500-$600 China bars...

 

[Cole Trickle]

What he said[emoji1]^^

I just found a 50" straight bar for $165 shipped right from the republic with warranty.... Identical to the rest of the $500-$600 China bars...

Hopefully you have good luck....

We did the same thing on a lot of 4 off eBay a year or so back. 1 didn't work right out of the box and getting it warranted took a while due to the boat ride.

Mine was assembled/sealed differently than the other 3 and would always fog up.

I have it kind of taken apart to fix but dam there hard to get apart...lol

I run rigid son my jeep but I also don't have a 50" bar because there stupid $$$.

I have a buddy that sells them for a good price. I think the 50" bars are $400 and the curved 50" is $499

 

[Reaper1]

Go to CTS. Louie is the man. :thumbup:

I wouldn't go anywhere else, even if it saved me money. Best shop in So Cal.

That's a bold statement

 

[AZKC]

Can you get strobes?

Dave, we do strobes but are switching most customers to the LED style. Much easier to install, no control box just 2 wires. Its getting tricky to install them in headlight and tail lights because of the many of layers of plastic to get to the inside of the light. Doing more grill mount and surface mounting.