DiMarco21
Well-Known Member
- Joined
- Dec 20, 2007
- Messages
- 138
- Reaction score
- 12
Need your address/phone...... Mine is 805-320-0123. Thanks, Robert Dekkers(Dekman)
Please check your PM's. Thanks.
Need your address/phone...... Mine is 805-320-0123. Thanks, Robert Dekkers(Dekman)
Over greased for sure. With 2 seasons of racing & lots of practice on the same seal, I learned that Phil's product doesn't require packing it "until the grease gun locks up". I can easily go a weekend of racing without touching it. What I have figured out is to hit the zerk with a full pump or so when you put the boat away. That way everything settles and it disperses most of the captured water. Hope it helps.This is after first 20 min run. Is this normal amount of intial goop that comes out? Or did I over grease it............ Only couple drops of water....much better! Thanks for your help......Rob
OK so I won't add any more grease till the oozing stops.......... and then only a gentile squirt...........
Thanks Phil.........
My prop and rudder seals have been working awesome all summer... no more water in the boat after extended use! I've left the boat in overnight a few times and it's dry the next day. I shoot some grease in there every now and again and that's it. I am really digging this setup. It's one of those things that gets more bitchin' as the time goes on. No more dickin' around with rope seals, a quarter turn here, a cotter pin there... this is the setup!
Thanks!
Jeff
Check your PM's Boss!
Nice piece Phil. Anything slated for tiller arms (with s/s inserts)?V-Drive 1" Rudder Quadrants
Direct replacement for your standard rudder quadrant.
Made from 6061-T6 aluminum. Standard 1" bore for 1" rudders, 1/4" keyway, 3/8" clamp hole for rudder, Top cable clamp features two milled in scallops to help "bite" into the standard 3/16" cable. Top clamp has a built in clearance when tightened onto steering cable it will be flush with the top surface. Supplied with 2x 1/4" corrosion resistance grade 8 bolts that screws into to 2 heli-coiled holes installed into the quadrant. Also supplied will be 2x 1/4"-20 lock nuts for safety.
Price is $209.00 + shipping.
Any questions please feel free to PM or call/text me at (925) 323-9093. Thank you, Phil
View attachment 273053
View attachment 273054
View attachment 273055
View attachment 273056
View attachment 273057
View attachment 273058
View attachment 273059
Nice piece Phil. Anything slated for tiller arms (with s/s inserts)?
I received mine from Phil a couple weeks ago . Very nice piece . It stopped my water leaks and it looks killer too . Thanks again Phil ..