Overkill?

[traquer]

I was at the race track recently and had trouble with my wimpy impact wrench..

Won't be having that problem again lol. 1400 lb/ft

 

[petie6464]

Have had mine for about 8 months. Never leave home without it. These are the best.

 

[petie6464]

One of my trialers has 12k Dexter axles with 5/8 studs and clamp ring. Spec. is 190/210 ft. Lbs. Blows them off with ease.

 

[Ziggy]

The underkill Old school impact.

 

[Sleek-Jet]

The underkill Old school impact. View attachment 955797

With a 4 foot piece of pipe to fit over the handle...

 

[LargeOrangeFont]

I was at the race track recently and had trouble with my wimpy impact wrench..

Won't be having that problem again lol. 1400 lb/ft

View attachment 955791

Buy the tire inflator that works off the same battery.

 

[HNL2LHC]

What better way is there to do it but over killing it!!!!

 

[HNL2LHC]

The underkill Old school impact. View attachment 955797

Don‘t forget to use the jack handle to get another 4 feet of leverage. LOL

 

[Tooned Up]

I have 2 of the 1/2” Milwaukee impact guns. I keep one in my toolbox at home and one in the toolbox of my truck. They are absolute money! We use the 3/4” impacts for work and I can tell you they will break 3” bolts!

 

[Shlbyntro]

What better way is there to do it but over killing it!!!!

Roadkilling it maybe...

 

[traquer]

Yeah hey, member with the Prevost bus: need to get your lug nuts or suspension parts off? I'm your guy lol. I feel like I could disassemble a bridge with this thing I love it.

 

[Carlson-jet]

Even if it is 9 out of 10 lugs, still better than the old school alternative.
I Like like those Red Electric tools. Few ever let me down. Down time is a loser.

 

[lbhsbz]

If you need that at the track and you’re not in the air brake class...someone has fucked up yore program.


A decent 1/4” hex drive to 3/8” square adapter in a respectable impact driver will take the Lugs off my truck...if torqued appropriately, the race car lugs should be a breeze.

Use a torque wrench to re-install please

 

[traquer]

^ I have your setup as well, lil stubby 18v Fuel 1/4". I will try a new battery because you're right maybe it should be better. Works 8/10 times on the 85 lb/ft lugs and other stuff.

 

[Carlson-jet]

So I have a bag of these red tools. I paid nothing for them. They were thrown away and I magically made them new again. Thank you Milwaukee.
I never thought of using the 1/4 drives on lug nuts. They could barely do anything a 8" 3/8 old school Plumb breaker bar could handle.
I still like the quality. That and I can use my phone to locate them via bluetooth.

 

[sgtskidmark]

1/4” lol