Rub rail help

[McRib]

Does anyone know who supplies essex/laser with the rub rail for their boats? I'm trying to help someone find the source. They won't sell it direct. BUT if I take it to them they will do it for me for a bazillion dollars.

 

[Singleton]

Post pic of rail.
the rail on my 2007 was discontinue. Reason I had to cap transom.

 

[McRib]

Won't have pics till the morning. Im in cali. Boat in az. Rub rail is the final piece to my puzzle and they can't find it locally. If i can find it local near me i will deliver it to them.

 

[mjc]

Check out Taco marine.

 

[28Eliminator]

Try “The Boat Body Shop” in Havasu. My brother says the guy has about 10,000 ft of run rail in his shop attic. That’s where he got his.. it had been discontinued for years.


Sent from my iPhone using Tapatalk

 

[BUDMAN]

Try “The Boat Body Shop” in Havasu. My brother says the guy has about 10,000 ft of run rail in his shop attic. That’s where he got his.. it had been discontinued for years.


Sent from my iPhone using Tapatalk

I was just going to suggest the same.

 

[brianwhiteboy]

I used these guys for my rub rail - Integrity Marine Products. https://www.integritymarinecorp.com/

My Carrera daycruiser used the typical aluminum rub rail with vinyl insert. Rex Marine had limited amounts/colors in 10’ sticks if I recall. I wanted longer sticks so I had less seams. Taco Marine carries it but it adds up quickly.

I decided to go with a rigid plastic rail with a stainless hollow half circle over it. Integrity Marine was the only company I could find that had something similar to my original size rail and would accommodate the stainless. They’re on the east coast and blew everyone else's prices away, even with the expensive shipping (20’ long tube). There stainless comes in 20’ sticks and so does the rigid plastic rail.

They outfit a lot of offshore boats but had hundreds of styles/sizes available. Again, no one could touch their prices on 20’ sticks of stainless and the quality was top notch.

 

[84miller]

Try “The Boat Body Shop” in Havasu. My brother says the guy has about 10,000 ft of run rail in his shop attic. That’s where he got his.. it had been discontinued for years.

I just dropped my boat off there Monday...Rod was surprised to see I had old school gold...which he stated he had in his shop if I ever needed...so I would give Boat Body a shot at it...


Sent from my iPhone using Tapatalk

 

[HALLETT BOY]

That stainless looks awesome !

 

[McRib]

I used these guys for my rub rail - Integrity Marine Products. https://www.integritymarinecorp.com/

My Carrera daycruiser used the typical aluminum rub rail with vinyl insert. Rex Marine had limited amounts/colors in 10’ sticks if I recall. I wanted longer sticks so I had less seams. Taco Marine carries it but it adds up quickly.

I decided to go with a rigid plastic rail with a stainless hollow half circle over it. Integrity Marine was the only company I could find that had something similar to my original size rail and would accommodate the stainless. They’re on the east coast and blew everyone else's prices away, even with the expensive shipping (20’ long tube). There stainless comes in 20’ sticks and so does the rigid plastic rail.

They outfit a lot of offshore boats but had hundreds of styles/sizes available. Again, no one could touch their prices on 20’ sticks of stainless and the quality was top notch. View attachment 846196 View attachment 846197 View attachment 846199 View attachment 846200

This is too skinny for my application. My old is like 1.5 inch channeled that a rubber insert goes in. I've been told its called BT1.

 

[McRib]

Looking for this.

 

[brianwhiteboy]

Looking for this.

They have quite a bit of different sizes. This one is a semi-flexible plastic that accepts the insert. There’s a pdf on their website that lists everything. They have a ton of crap. Most is semi-rigid to rigid plastic base, unless you definitely need aluminum.

 

[McRib]

They have quite a bit of different sizes. This one is a semi-flexible plastic that accepts the insert. There’s a pdf on their website that lists everything. They have a ton of crap. Most is semi-rigid to rigid plastic base, unless you definitely need aluminum. View attachment 846453

Looks the same for sure. Boat came with aluminum. Wanna replace the same.

 

[Rexone]

I spoke with McRib, for aluminum in the size he wants Taco's the only game left. I told him to check West Marine as they are a Taco dist (I no longer am), outside of that to get from Taco directly. What's he's looking for is 1 1/2", not BT-1, which is 1" and which I have tons of.

 

[rush1]

Try here

Rex Marine High Performance Boat, Marine Parts, Hardware

High performance boat parts, marine parts, automotive parts manufacturer and international distributor, including, billet aluminum hardware, marine gauges, performance exhaust systems, manifolds, headers, mufflers and silencers, stainless exhaust tips, and many other parts and accessories for...

www.rexmar.com

 

[EPL]

Try this place , have found a lot of trim there here I wasn't able to find anyplace else !! https://eagle-aluminum.com/

 

[McRib]

I spoke with McRib, for aluminum in the size he wants Taco's the only game left. I told him to check West Marine as they are a Taco dist (I no longer am), outside of that to get from Taco directly. What's he's looking for is 1 1/2", not BT-1, which is 1" and which I have tons of.

Thanks for the phone call. I have lots of searching to do.

 

[Go-Fly]

AP Products part number 021-54603-16 Maybe?

 

[240Hallett]

Just do a full cap on it.

 

[EPL]

Looking for this.

Not sure what size your looking for but Eagle Moulding has it !! https://eagle-aluminum.com/

 

[RiverDave]

Does anyone know who supplies essex/laser with the rub rail for their boats? I'm trying to help someone find the source. They won't sell it direct. BUT if I take it to them they will do it for me for a bazillion dollars.

www.rubrails.com