WELCOME TO RIVER DAVES PLACE

Schiada exhaust

Rattle Can Lou

Well-Known Member
Joined
Dec 27, 2007
Messages
1,173
Reaction score
1,769
531" TT motor...boat is going to Havasu for interior and while there I would like to get the exhaust done also..Paul or RD...can you tell me who to seek out for that?? Or anybody..
 

SFV2RVR

Registered Parker Legend
Joined
Oct 4, 2007
Messages
2,861
Reaction score
1,863
531" TT motor...boat is going to Havasu for interior and while there I would like to get the exhaust done also..Paul or RD...can you tell me who to seek out for that?? Or anybody..

Drop it off at Teague in Valencia or at IMCO in San Dimas on your way out before you bring it to havasu or you could drop it off on the way back after the interior is done.


Sent from my iPhone using Tapatalk
 

rivergames

Well-Known Member
Joined
Jan 7, 2008
Messages
15,828
Reaction score
12,931
Drop it off at Teague in Valencia or at IMCO in San Dimas on your way out before you bring it to havasu or you could drop it off on the way back after the interior is done.


Sent from my iPhone using Tapatalk

You're not Paul or RD therefore our comments don't matter to jingle Lou Can....

But, if i were to get exhaust done up, I'd go strait to IMCO
 

BamBam

Well-Known Member
Joined
May 14, 2008
Messages
1,056
Reaction score
640
Drop it off at Teague in Valencia or at IMCO in San Dimas on your way out before you bring it to havasu or you could drop it off on the way back after the interior is done.


Sent from my iPhone using Tapatalk

^^^^^^ This is where I would go. Imco may be a little easier access for you in the direction you are coming from.
 

Wheeler

I'm just here to bitch about others negativity.😁
Joined
Dec 25, 2007
Messages
24,921
Reaction score
39,106
Since it will be in Havasu, I'd talk with Jimmy Lewis and see what he can do for you.
 

HighVoltage329

Well-Known Member
Joined
Jan 25, 2009
Messages
1,178
Reaction score
1,387
GT Performance is another option. He did a nice job on my Vector’s
 

Dalton

Well-Known Member
Joined
Apr 15, 2011
Messages
2,246
Reaction score
2,036
jimmy "louis" - louis performance, has done quite a few schiadas, and can for sure point you in the right direction, might even have some tail pipes
 

Outdrive1

Outdrive1 Marine Sales https://www.outdrive1.com/
Joined
Dec 19, 2007
Messages
32,729
Reaction score
28,067
Imco. Teague. In Havasu Brad at E Ticket. Barrett also told me he had someone else in town. You can call E Ticket and Barrett and see what they can do.


Sent from my iPhone using Tapatalk
 

obnoxious001

Engine building character
Joined
Dec 28, 2007
Messages
6,467
Reaction score
3,816
531" TT motor...boat is going to Havasu for interior and while there I would like to get the exhaust done also..Paul or RD...can you tell me who to seek out for that?? Or anybody..
What turbo system do you have? I am currently doing some cosmetic stuff to a Race Aero turbo engine that came out of a Schiada, and current owner plans to run short dry pipes, so the double wall stainless ones will be for sale. This one has the newer version Gentry turbo housings on the Race Aero manifolds.
 

Riverbottom

Well-Known Member
Joined
Oct 30, 2007
Messages
2,338
Reaction score
2,510
All of the above sound like quality shops. I had Eddie Marine build some one off double jacket stainless pipes a few years ago. They did a great job. Just one more option.
 

Rattle Can Lou

Well-Known Member
Joined
Dec 27, 2007
Messages
1,173
Reaction score
1,769
Barry that's exactly what I have...Talked to Andy Barker..(The Schiada Killer) and he said IMCO also..Maybe we should measure from transom on mine and you do the same...might be an option for me...Thanks everybody..IMCO seems to get the nod in all circles. I'm sure I can get a ride for it from somebody to San Dimas from Havasu...
 

obnoxious001

Engine building character
Joined
Dec 28, 2007
Messages
6,467
Reaction score
3,816
IMCO is the standard in making nice exhaust, however if these pipes work they are nice and would save you a pile of money. Swim across the river when you are here and have a look.
 

farmo83

Well-Known Member
Joined
Jun 9, 2008
Messages
2,395
Reaction score
2,521
I think Teague makes them for most of all the new Schiada's
 

Rattle Can Lou

Well-Known Member
Joined
Dec 27, 2007
Messages
1,173
Reaction score
1,769
Barry I could drive over on the Friday of the boat show in Needles..I will check length when I set motor in on Saturday...that date would be 2/22..
 
Last edited:

SFV2RVR

Registered Parker Legend
Joined
Oct 4, 2007
Messages
2,861
Reaction score
1,863
Barry that's exactly what I have...Talked to Andy Barker..(The Schiada Killer) and he said IMCO also..Maybe we should measure from transom on mine and you do the same...might be an option for me...Thanks everybody..IMCO seems to get the nod in all circles. I'm sure I can get a ride for it from somebody to San Dimas from Havasu...

I can get them from San Dimas to Havasu no problem. I do the drive damn near weekly! Lol


Sent from my iPhone using Tapatalk
 

Rattle Can Lou

Well-Known Member
Joined
Dec 27, 2007
Messages
1,173
Reaction score
1,769
Thanks Marc...I will let you know what's going on...don't know how long it will be in Upholstery stage...
 

obnoxious001

Engine building character
Joined
Dec 28, 2007
Messages
6,467
Reaction score
3,816
Barry I could drive over on the Friday of the boat show in Needles..I will check length when I set motor in on Saturday...that date would be 2/22..
Alright, I can get a length on these too. These would angle down from the housing, straight double wall through the transom, with the water dumped at the tips. He picked up the other parts that were not being used with his engine yesterday, but I had him leave the pipes as you and one other are interested in them.
 

Rattle Can Lou

Well-Known Member
Joined
Dec 27, 2007
Messages
1,173
Reaction score
1,769
DE6FD4DB-20CC-4A00-B87A-5331FA153F45.jpeg
B4D78B1F-764D-4D1B-BF9E-7D97BD7620D6.jpeg
DE6FD4DB-20CC-4A00-B87A-5331FA153F45.jpeg
97C5A3BC-EB67-4FEA-9ABB-7D7AF29AC041.jpeg
 

Rattle Can Lou

Well-Known Member
Joined
Dec 27, 2007
Messages
1,173
Reaction score
1,769
Sorry kinda new to RDP photo gig. I will make it this summer. Lots of time and money. Lol
 

Rattle Can Lou

Well-Known Member
Joined
Dec 27, 2007
Messages
1,173
Reaction score
1,769
Barry the measurement from top of turbo flange to transom is 313/4”.
 

Deangang

v-drive row member
Joined
Aug 18, 2011
Messages
509
Reaction score
979
Nice numbers , you’ll love it when your cruising along about 60 or 70 and light the candles on the the boost .
 

Rattle Can Lou

Well-Known Member
Joined
Dec 27, 2007
Messages
1,173
Reaction score
1,769
Yes...I'm old...time for a hatch...and I don't want the motor covered in spray of lake water...
 

rivergames

Well-Known Member
Joined
Jan 7, 2008
Messages
15,828
Reaction score
12,931
Yo Lou(cifer), quick question amigo. What is that bracket mounted to the floor between the turn fin housing and your strut?
 

Outdrive1

Outdrive1 Marine Sales https://www.outdrive1.com/
Joined
Dec 19, 2007
Messages
32,729
Reaction score
28,067
Yo Lou(cifer), quick question amigo. What is that bracket mounted to the floor between the turn fin housing and your strut?

Bilge pump?


Sent from my iPhone using Tapatalk
 

Rattle Can Lou

Well-Known Member
Joined
Dec 27, 2007
Messages
1,173
Reaction score
1,769
OK...so the boat has a stainless blast plate that goes from the strut back to the plate...it's only about 4" wide. So the losse bolt is for the waterwitch that makes the bilge automatic. Then the bilge pump bracket has another bracket over the top of it...I would show pic but boat is at shrink wrapper right now getting prepped for Wednesday snow trek to Havasu..
 

74 spectra20 v-drive

74 spectra20 v-drive
Joined
Nov 27, 2008
Messages
2,030
Reaction score
2,844
I feel like Pinocchio every time I venture into a Schiada engine thread, "Some day ill make real power" Great job with the boat, I love the cap job and classic colors.
 

GGames

Well-Known Member
Joined
Sep 24, 2013
Messages
299
Reaction score
414
Sexy!

Sent from my SM-G955U using Tapatalk
 

oldschool

Well-Known Member
Joined
Nov 1, 2007
Messages
8,819
Reaction score
11,002
Looks bitchen, I love the color and the cap. With those #'s I'd think about bracing up the strut while the motors out.
 

1homeblown

Well-Known Member
Joined
Apr 2, 2009
Messages
578
Reaction score
649
RCL,
Any updates on this project?


Sent from my iPhone using Tapatalk
 

sintax

Well-Known Member
Joined
Mar 7, 2008
Messages
6,733
Reaction score
11,191
I feel like Pinocchio every time I venture into a Schiada engine thread, "Some day ill make real power" Great job with the boat, I love the cap job and classic colors.

haha you and me both, i dont even know why I even come in this part of forums anymore. I guess its the same reason I check out chicks that are way out of my league?
 
Top