Swapping bravo 3 for bravo 1 lower end

[Bigwebb1978]

I have a 21 ft eliminator 215 skier with a bravo3 and a 350 mag. I am thinking about swapping the lower for a bravo 1. Has anyone done this? What kind of prop should I go to and any problems I might encounter?

 

[BDMar]

It will bolt right up. The problem is probably going to be the gear ratio. With a 350 mag you probably have the 2.00:1 gear ratio. Normally a Bravo One with a 350 mag will have the 1.50:1 ratio. Check the ratio stamped on the side of the drive. It might difficult finding a propeller to work properly with any gear ratio lower (higher number) than 1.50:1.