SXS pics.

[Wmc]

Switched the 2+5 rims with the 5+2 Rims...Saved 6" overall front and back. Now I'm 12" in the front and 11" in the back. What do you think now. Doesn't matter what Tobie thinks..

View attachment 88543

View attachment 88544

View attachment 88545

View attachment 88546

looks way better:thumbsup:thumbsup

 

[Bobby V]

Rhino and member at black gold, your way to much of a baller for me

My wife is a counselor at El dorado high school, we moved into the area about 2 years ago. love it here

do you have a 660 carb or 700efi?

Black Gold is a public course. Just in the Players/ Mens club. I have the 660.

 

[Bobby V]

looks way better:thumbsup:thumbsup

Thanks William...Can't wait to get it dirty...

 

[TOBTEK]

BOBBIE......... Way better! I was gonna post this for you, but it doesn't apply anymore.

[video=youtube;8iffDvXTcm8]http://www.youtube.com/watch?v=8iffDvXTcm8[/video]






Paul..... your pods are VERY pro! You SHOULD be doing high end install's! Question though.....didn't SSV make a set you could have painted? I have done a few sets of custom pods. BUTT LOAD of work!

The Razor looks pretty darn good......for a GAYZOR that is.

 

[Outdrive1]

BOBBIE......... Way better! I was gonna post this for you, but it doesn't apply anymore.

YouTube- War - Low Rider






Paul..... your pods are VERY pro! You SHOULD be doing high end install's! Question though.....didn't SSV make a set you could have painted? I have done a few sets of custom pods. BUTT LOAD of work!

The Razor looks pretty darn good......for a GAYZOR that is.

SSV didn't make anything for the 7/7's, so I figured I'd make my own. Yes, time and material, I'm way over what I could have bought black SSV pods for. I've been working on these for about three weeks in off time.

 

[Cole Trickle]

Finished the stereo. All JL Audio stuff. Made pods with 7/7's and one 10w3 with a JL hd marine amp. It's waaaaay louder than I expected. I'm stoked, and I did I mention I love this thing????? I could sell my boat tomorrow and not give a shit. I can't believe how loud it is, lol.

Looks great.....

I can only imagine what those 7's sound like in t hat little cab with the doors shut. I imagine its loud as fuck and the whole car acts like a giant box with that 10w3

Nice job...I need to get one of those volume nobs

 

[djunkie]

Looks great.....

I can only imagine what those 7's sound like in t hat little cab with the doors shut. I imagine its loud as fuck and the whole car acts like a giant box with that 10w3

Nice job...I need to get one of those volume nobs

Is your done? Lets see some pics.

 

[TOBTEK]

My spindles thank me...but my savings account is a little pissed...

SHOULD HAVE called me.... could have scored you the DWT's cheap! Its only money, and your LOADED right........

 

[YoPengo]

Bobby.... the rhino looks great. :thumbsup

 

[BMABITY]

Black Gold is a public course. Just in the Players/ Mens club. I have the 660.

how has the 660 treated you. there are some steals on used 660's, would i be a fool not to buy efi?

 

[TOBTEK]

how has the 660 treated you. there are some steals on used 660's, would i be a fool not to buy efi?

NOTHING wrong with a 660 carb Rhino. Id get one in a Sec! You can get some SMOKING deals on them ! The 686(700 as Yamaha calls it) Efi is nicer...BUT more $$$. The Efi makes starting WAY better, and if you ride in HIGH altitude the efi will be better. BUT if your the average guy that will cruise at the river or local Dez...NOTHING wrong in saving the money.

 

[djunkie]

how has the 660 treated you. there are some steals on used 660's, would i be a fool not to buy efi?

NOTHING wrong with a 660 carb Rhino. Id get one in a Sec! You can get some SMOKING deals on them ! The 686(700 as Yamaha calls it) Efi is nicer...BUT more $$$. The Efi makes starting WAY better, and if you ride in HIGH altitude the efi will be better. BUT if your the average guy that will cruise at the river or local Dez...NOTHING wrong in saving the money.

My 660 with a Dynatek CDI and a rejet runs away from my brothers '08 700 EFI. Also I take mine up to Lake Arrowhead quite a bit and never have a problem with the altitude change. I think the 660's come from the factory jetted wrong and need to be tuned. Mine cold starts very good. I did notice that it got a lot better after I adjusted the valves. They were all tight.

 

[Bobby V]

My 660 cold starts fine also. A tip I read on the Rhino forums said to turn the key to the right until the lights on the dash come on. Then turn the key to the start position. A little choke and your good to go.

 

[djunkie]

My 660 cold starts fine also. A tip I read on the Rhino forums said to turn the key to the right until the lights on the dash come on. Then turn the key to the start position. A little choke and your good to go.

I used to do that too. Sometimes it worked and sometimes it didn't. If you haven't had a valve adjustment yet then do it. It made the biggest difference. Mine just plain runs better after I did it.

 

[Bobby V]

I used to do that too. Sometimes it worked and sometimes it didn't. If you haven't had a valve adjustment yet then do it. It made the biggest difference. Mine just plain runs better after I did it.

Valves were adjusted last week...:thumbsup

 

[BMABITY]

Valves were adjusted last week...:thumbsup

How much does it cost?

I found a rhino with 619 miles and 69hrs. Is this considered a lot and should I steer clear or is that not many for a 2007?

 

[Sig Ep Mock]

How much does it cost?

I found a rhino with 619 miles and 69hrs. Is this considered a lot and should I steer clear or is that not many for a 2007?

That's not many miles....I sold my 06 SE with over 3000 miles and 100 hours

Doing the math and the one you found averages just about 9 mph...pretty cushy life compared to what mine saw

Chris

 

[riverratmike]

I believe no valve adjustment is nessesary with the 660 motors. I have nearly 4000 miles on my 2006 SE Rhino 660 and still runs like new and valves have never been adjusted. Just my .02

 

[djunkie]

I believe no valve adjustment is nessesary with the 660 motors. I have nearly 4000 miles on my 2006 SE Rhino 660 and still runs like new and valves have never been adjusted. Just my .02

I believe they do need adjusting. Just because its still running ok doesn't mean they aren't out of adjustment. My were way out. It still ran fine but runs even better now that they're adjusted right.

 

[Ivan Dan]

I believe they do need adjusting. Just because its still running ok doesn't mean they aren't out of adjustment. My were way out. It still ran fine but runs even better now that they're adjusted right.

Did you do this yourself?

 

[djunkie]

Did you do this yourself?

Yes. The exhaust valves are a little hard to get to but its not bad. You'll ned to take your cage off and tilt the bed to get to them.

 

[Just Electric]

heres pics of the earlier years at the parump 250 bitd 3 years ago
we decided to spend the money on the motor work first and built are own a arms and supension.we did all the work our selves keeping with the stated rules of it has to appear stock looking

 

[slowboat]

just got another side by side.
Traded a older gent for my Manx.
pretty fair trade.:thumbsup

has
rear wheel spacers,
hrc kick panels
CDI and
whip.

needs
cage
seats
belts
hid's
doors
replacements kings
arty2:

 

[TPC]

photo by big mike

Rzr S 4 seater at Havasu Polaris.
They are asking $14.999.

 

[Outdrive1]

photo by big mike

Rzr S 4 seater at Havasu Polaris.
They are asking $14.999.

That's a really good looking machine. :thumbsup:thumbsup

 

[YoPengo]

15k… that’s better than I thought it would be.

 

[RiverDave]

photo by big mike

Rzr S 4 seater at Havasu Polaris.
They are asking $14.999.

Are those the stock wheels and tires? I'd like to know what kind of tires those are, and size.. Look good!

RD

 

[TPC]

Are those the stock wheels and tires? I'd like to know what kind of tires those are, and size.. Look good!

RD

I'll find out from Big Mike when he re-surfaces in the forums.
Evidently he bought it and is already installing the MCX turbo - is the word on the forums we hear,, damfino:
http://www.mcx-usa.com/polaris-rzr-turbo-installation.php

Ya can't drive around the street of Havasu too long and not see Big Mike driving about in one of his Rzr S.

 

[TOBTEK]

Are those the stock wheels and tires? I'd like to know what kind of tires those are, and size.. Look good!

RD

hard to tell....but they look like DWT Dialbo's. I have a connection there RD at DWT. The new Black Chrome versions are SICK! You "may" be able to work some proto type trading with them???? Local Vista/Oside company.
Id run the 14" dialbo's in a Sec on my car!

 

[TOBTEK]

NOW....that's its DONE. Let go use these GolfCarts :champagne:

 

[RiverDave]

Toby I want to come over and check out your car one of these days.. BTW, I do'nt think I'd trade your wheels for any others out there, those bad boys are SIIICCCKK!!

RD

 

[sean]

bout time you put pix up tob!:thumbsup

 

[Ivan Dan]

NOW....that's its DONE. Let go use these GolfCarts :champagne:[/quote]

Got your clubs shined up?

Could you imagine this crowd on a golf course with these things? :skull Don't think there'd be much left of the course.

 

[Just Electric]

nice beater tob

 

[sean]

i can bungy my bag to the rollbar

 

[Ivan Dan]

i can bungy my bag to the rollbar

Rachet straps :thumbsup

 

[TOBTEK]

i can bungy my bag to the rollbar

huh,huh,huh....he said BAG. In my best butthead voice.

 

[sean]

at my age i can use the.. "support"

 

[slowboat]

My Old Arctic cat Prowler & My new "to me" Yamaha Rhino
Both have WE replacments shocks, best thing for a AC or Rhino you can buy IMO.

 

[slowboat]

couple more photos.
not sure why the rhino is so much more well liked then the AC.
ive had both and they are about the same speed but the AC had a shit load more room in it!!!

 

[slowboat]

Now with a cage, wheel spacers, seats front and rear and WES shocks.
little better.:thumbsup

 

[wsuwrhr]

with that much of a running start and i could make it up that hill in river daves golf cart

No shit. Put that girl at the base of the hill and let's see what she does.

 

[270]

Just did a color change from red to green. Wasn’t sure if I liked it a t first buts it’s starting to grow on me.

 

[RiverDave]

Does the bed still move with that cage on it? (Just wondering if they slotted the bed to allow for movement?)

RD

 

[270]

Does the bed still move with that cage on it? (Just wondering if they slotted the bed to allow for movement?)

RD

Yes it still tilts but you have to take out two bolts where it's bolted to the rear of the bed.

 

[Ivan Dan]

Just did a color change from red to green. Wasn’t sure if I liked it a t first buts it’s starting to grow on me.

Looks great! Just need some doors now! I think black wheels would really look nice on your rig too!

 

[Deleted Account]

Yes it still tilts but you have to take out two bolts where it's bolted to the rear of the bed.

How's the wipe down? :skull:champagne:

 

[270]

Looks great! Just need some doors now! I think black wheels would really look nice on your rig too!

Thanks bud. I'm still looking for doors that I like.

How's the wipe down? :skull:champagne:

That picture was taking before I was married and she would help me wipe the boat down. She hasn’t picked up a towel or a bottle of hot sauce since. :thumbsdown

It’s funny how once you say I do they say I won’t……..

 

[djunkie]

That picture was taking before I was married and she would help me wipe the boat down. She hasn’t picked up a towel or a bottle of hot sauce since. :thumbsdown

It’s funny how once you say I do they say I won’t……..

I'm bettin theres at least 5 people right now wanting to tell you "I told you so".:skull:skull

 

[270]

Here you go RD. Just one bolt on each side of the bed and she tilts up for cleaning.

Or remove the front bolts and flip it the other way. Makes getting the hood off a one man job.