Have you thought about just updating the whole unit?
CP Performance - Livorsi Billet Two Handle Throttle / Shifter Controls
Livorsi Billet Two Handle Throttle / Shifter Controlswww.cpperformance.com
Two Lever Xtreme Throttle/Shifter Control Customizer - CP Performance
Two Lever Xtreme Throttle/Shifter Control Customizerwww.cpperformance.com
There is or was a guy on Facebook in "The Original Powerboat Swap Shop" named Jay Annicharico that builds and sells them. I have only seen singles, but he probably can/does make double button also. Looks like he makes a lot of small but cool billet parts. I don't know anything about him other than what I have seen via his posts there.
Possibly the wrong side I assume, been hanging in my garage since rex closed them out, they were so cheap I bought a few.
If it works, PM me your address and its yours free, but if it is not the right one I will hold onto it. View attachment 1000160
EDIT
I would appreciate the donation. I figure I can simply relocate the switches to the other side. Then make a small cover plate for the correct holes !!!
Possibly the wrong side I assume, been hanging in my garage since rex closed them out, they were so cheap I bought a few.
If it works, PM me your address and its yours free, but if it is not the right one I will hold onto it. View attachment 1000160
YES sir. I’ll take it. Really appreciate it. I sent a PM.
You are a good guy. Great jobUnless I brain fart on the way home its heading out his afternoon
View attachment 1000863
You are a good guy. Great job
Just trying to build up some brownie points before I hit the pearly gates!!
My plan is to go UP not DOWN!!
If you find you can't flip it--don't toss it I will put it in my "hardware I have to have but don't need" section!!lol. I like the plan ! I really do appreciate it. These things are as rare as hens tent!
If you find you can't flip it--don't toss it I will put it in my "hardware I have to have but don't need" section!!
Good luck I hope it works, its been hanging in my garage for several years!
I have the same one I would give away also. He beat me to it.I will send it Monday, going out of town this weekend
You can trim with your fingers instead of thumb may work.Absolutely. If it can’t be flipped. It will be sent back. But never estimate what can be done with a drill press, Dremel and a hand file !
You can trim with your fingers instead of thumb may work.
I have the same one I would give away also. He beat me to it.
I’d love to take a crack at it. This would be a fun project for my new-to-me Shapeoko!
I’m not a big fan of my steering column trim lever. With one hand on the throttle and the other on the wheel, I have to loosen my grip to adjust trim.
View attachment 1001089
If you want it you can have it. In hsvasu.I’d love to take a crack at it. This would be a fun project for my new-to-me Shapeoko!
I’m not a big fan of my steering column trim lever. With one hand on the throttle and the other on the wheel, I have to loosen my grip to adjust trim.
View attachment 1001089
Absolutely. If it can’t be flipped. It will be sent back. But never estimate what can be done with a drill press, Dremel and a hand file !
@mjc i messaged you.
how do you think you’ll run the wiring down the lever?
@Melloyellovector has a one off shifter
From what I’ve seen. They are simply tied down to the nearside throttle lever. Btw, I agree on not wanting to loosen the grip on the wheel.
@v6toy4x we don’t turn knobs anymore as the desktop stuff has really changed how small batch/prototyping is done. We can go from cardboard cut out to plastic 3D print to machined product in a day.
Haven’t been behind a three axis since 2010. Used to machine the four-bolt flanges off t3 and t4 turbine housings so I could weld on a conical defusers to a 5” v-bands. Def don’t miss the pre-heat process prior to tig welding it all together. Especially shitty during monsoon season when the swamp coolers were obsolete. View attachment 1001223
I’ ll check it out. Thank you. I might get lucky.
@v6toy4x tell me about it! I started with the basics when I opened up the shop. I’m still hand drafting projects on iso paper but the last job I did paid enough to build a desktop PC.
I can’t wait to get back into CAD/CAM software like Solidworks. This throttle/trim project will be a great exercise to start with! @MK1MOD0 if I can help in any way lemme know!
Doesn’t look complicated from first glance! Going to tinker at the shop mañana
View attachment 1002585
View attachment 1002586
View attachment 1002587
Doesn’t look complicated from first glance! Going to tinker at the shop mañana
View attachment 1002585
View attachment 1002586
View attachment 1002587
You are more than welcome!I’m glad ya brought this thread back up. I want to thank V6toy4x for the trim conglomerates. They work perfect.
Or Gas ️Since I’ve got twins. I’d be looking at about $1500 bucks. Hoping to keep the cost down a bit. $1500 would go a long ways to a set of hydraulic jack plates