RDP'S "What are you working on?"

[monkeyswrench]

I cheated a little and made a snip so I didn’t have to remove the whole grill.
View attachment 1353010

I've used a sawzall a few times, even a pot-a-power to "persuade" things....but sometimes a 48" SnapOn crow bar just gets things handled

 

[Cdog]

I've used a sawzall a few times, even a pot-a-power to "persuade" things....but sometimes a 48" SnapOn crow bar just gets things handled

 

[Cdog]

The dealer wanted 4K to do this. Hell to the NO!!

$180 in parts

 

[530RL]

 

[J&k beer can]

finished the 700r4 swap..
now its time to finish my 69 fastback

 

[Gramps]

spent about 4 hours today on this blade....holes, bevel and some sanding. Next is the scary part - heat treating

 

[lbhsbz]

spent about 4 hours today on this blade....holes, bevel and some sanding. Next is the scary part - heat treating
View attachment 1354723 View attachment 1354724

Maybe a stupid question....but why are you heat treating? It's a file....it's already heat treated, no?

 

[Gramps]

Maybe a stupid question....but why are you heat treating? It's a file....it's already heat treated, no?

yes it's already heat treated but ........it needs to be annealed to cut, grind on, shaped, sanded and drilled once all of that is done you heat treat it and "normalize" it then the finish sanding, sharpening etc is done.....................home that makes sense

 

[TPC]

Up early smoking meats.
Send this to the neighbor:

They sent back 4 dozen fresh laid eggs and this fresh outta the oven:

 

[TPC]

It’s like opening the Tupperware cabinet. Plastic shit flys everywhere

,,, as you tell yourself ya gotta straighten this out someday.

 

[Mr. C]

Two shelves up. If only the walls were square I could have had a better fit than 1/8 gap on side of the shelves. Oh well what ya gonna do.
Patching old mount holes. A little texture coat and paint. Call it good.
Might raise the lights up a bit but those are easy.
Rechargeable LED multicolor lights in. They secure by a magnet inside the globe.

 

[Mr. C]

Then. Some people. ( meaning the little woman). Can’t wait and has to put stuff back. Even though she knows she has to take it all down again.
And yes. The lights will definitely be raised a good bit.

 

[Taboma]

View attachment 1353118 View attachment 1353119 View attachment 1353120

Yours is much nicer than my old Robinson Heliporter I'd modified for my pwc projects. Lost it in the fire along with the one out of the only two all carbon fiber Yamahas perched on it. Sure made it handy for working height and loading / unloading out of the truck bed.

 

[530RL]

Yours is much nicer than my old Robinson Heliporter I'd modified for my pwc projects. Lost it in the fire along with the one out of the only two all carbon fiber Yamahas perched on it. Sure made it handy for working height and loading / unloading out of the truck bed.

View attachment 1355256

That one will lift 6500 pounds. A little beefier.

 

[Taboma]

That one will lift 6500 pounds. A little beefier.

Wife was facility manager for a company and a tenant left it when they moved out of a rented building. I hated to lose it.

 

[Mr. C]

Ok. Four more up. Fucking hate how un square the walls are but is what it is. ( and yes the shelves are square. lol).
Silicone it in and paint I guess.
Any better suggestions??

 

[rivermobster]

Ok. Four more up. Fucking hate how un square the walls are but is what it is. ( and yes the shelves are square. lol).
Silicone it in and paint I guess.
Any better suggestions??
View attachment 1356464

This is why God invented paintable Dap.

My project today...

 

[Mr. C]

So I go out for a few. Come back.
Same as the wine bar shelves.
I still need to fine tune /shim a couple for levelness. Finish the final painting coats.
But hey. Let’s move everything 10 times.

 

[4Waters]

View attachment 1327942

Won't idle, has a brand new carb and same issue as rebuilt carb. It is very very lazy on the Rev, dizzy is set correctly but it even get it to fire you have to retard the shit out of it. We are down to a base engine problem, we think the cam is off a tooth. We don't know anything about the build except no one has been able to make idle since it was rebuilt (4 owners now). Time to pull the motor and split the case.

Unknown size, Unknown cam, all we know is it came with a 356 speedster carb (just one) and a 356 dizzy.

The owner is a friend or ours that is battling throat cancer and they need the money.

Spent about an hour on this today, @coolchange came over so we could get another set of eyes on it. After fukin with it and checking valve events and the fact that the compression is 130 to 140 psi he agrees that the cam is most likely off a tooth or 2. It's about the laziest reving engine I've heard, a damn Model A revs faster.

 

[callbob]

Caulk and paint make a carpenter what he aint

 

[Mr. C]

One more shelf done( well mounted needs finishing touches) Tv on its legs not mounted temporarily
Tomorrow. Hopefully. Trimming the mantle by about 8 inches. And mount the tv over that. And then a second long shelf before the new cabinet comes in.
When the mantle try fails.
A new reclaimed wood mantle will find a new home.

 

[chvynhra]

Caulk and paint make a carpenter what he aint

Try your best and caulk the rest.

 

[Ace in the Hole]

spent about 4 hours today on this blade....holes, bevel and some sanding. Next is the scary part - heat treating
View attachment 1354723 View attachment 1354724

I spent a lot of time in Ken Onion's (https://kenonionknives.com) garage as a kid watching him make knives....that is truly an art. Something I wish I would have learned. Always fascinated me.

 

[Ace in the Hole]

finished the 700r4 swap..
now its time to finish my 69 fastback
View attachment 1354000

Idk what it is about that green but......I need that on something with a motor in my life

 

[Eliminator21vdrive]

So in an attempt to consolidate projects and make room it was time to finish the bed project for my 49 truck.
I wont narrate every picture but I started with making inner fender wells that mimicked the shape of outer fender I had bought steel and bent the bed sides when I was working at Wyotech like 8 years ago and before anyone asks it is a altered wheel base and aftermarket parts are thin so build it myself.

So commence working!

Ta daaaa!!!

 

[coolchange]

Spent about an hour on this today, @coolchange came over so we could get another set of eyes on it. After fukin with it and checking valve events and the fact that the compression is 130 to 140 psi he agrees that the cam is most likely off a tooth or 2. It's about the laziest reving engine I've heard, a damn Model A revs faster.

If the guy that built that couldn’t time a cam, better check the deck heights also.

 

[callbob]

Getting ready to put Sumo springs, Saf T Steering stabilizer and sway bar adjustments to Moho. Easy stuff

 

[mjc]

Getting ready to put Sumo springs, Saf T Steering stabilizer and sway bar adjustments to Moho. Easy stuff

Hardest part of that is centering the Saf T Steer. I am still not happy with mine after multiple attempts.

 

[callbob]

Hardest part of that is centering the Saf T Steer. I am still not happy with mine after multiple attempts.

Well after reading reviews and what not, I have come to believe that. My plan is to get it aligned after the changes so hope they will center if need be. From all I have read, these changes make a world of difference in handling. Not bad now (subjective to experience I think) but don’t care for body lean and road wander at times. The big thing is sway bar adjustment because the Ford F53 chassis is set up from factory not knowing which body is going on from what I read. Moving the connection to lower bolt hole stiffens the roll tendency. Any experts know something different I’m listening.

 

[Eliminator21vdrive]

So in an attempt to consolidate projects and make room it was time to finish the bed project for my 49 truck.
I wont narrate every picture but I started with making inner fender wells that mimicked the shape of outer fender I had bought steel and bent the bed sides when I was working at Wyotech like 8 years ago and before anyone asks it is a altered wheel base and aftermarket parts are thin so build it myself.

So commence working!


View attachment 1356729 View attachment 1356730 View attachment 1356731 View attachment 1356732 View attachment 1356733 View attachment 1356734 View attachment 1356735 View attachment 1356736 View attachment 1356737 View attachment 1356738 View attachment 1356739

Ta daaaa!!!

 

[TPC]

Cleaned & Flex sealed the swamp coolers insides, replaced the pads & serviced the moving parts,,, ready for summer.

 

[JayBreww]

Well this was a first, put a Fabcraft Posi in the extra 3rd member i have. Waiting on axles and in the 55 it goes.

 

[Nordie]

Just whipped one up for work tomorrow

 

[Mr. C]

So. Baby steps. Shelves are in and level and secure. And yes. The little woman has / is re doing the shelves again. Even though I said tomorrow I will caulk and touch up the paint. That’s just baffling to me but oh well I’m not doing it. Lol.
Mantle top cut out. Still waiting on wood mantle to make final decision on how much more to cut off remaining mantle. Textured and painted just now. Then up with the tv
Our cabinet for the stereo equipment came in but in black so delays waiting for the white one. But Anywhoo. I’m pleased. But better yet. She’s happy
Still not sure if I want to move the speakers back in under the inset.

 

[GNEnsrud]

I’ve got way too many projects in the hopper currently.
Priority #1: get the bracket car ready for the 2024 season
Priority #2: get the Centurion Warrior Barefoot I recently drug home buffed & waxed, figured out and ready for summer.
Priority #3: Motorhome yearly maintenance
Priority #4: yard work.
never ending.…..

 

[Hoodoo]

 

[4Waters]

View attachment 1360005 View attachment 1360007 View attachment 1360009 View attachment 1360008 View attachment 1360010 View attachment 1360012 View attachment 1360013

That looks really nice

 

[Emac]

So in an attempt to consolidate projects and make room it was time to finish the bed project for my 49 truck.
I wont narrate every picture but I started with making inner fender wells that mimicked the shape of outer fender I had bought steel and bent the bed sides when I was working at Wyotech like 8 years ago and before anyone asks it is a altered wheel base and aftermarket parts are thin so build it myself.

So commence working!


View attachment 1356729 View attachment 1356730 View attachment 1356731 View attachment 1356732 View attachment 1356733 View attachment 1356734 View attachment 1356735 View attachment 1356736 View attachment 1356737 View attachment 1356738 View attachment 1356739

Ta daaaa!!!

Have anymore of the inner fenders you built laying around? Currently building a 51 and could use a pair of those!

 

[Eliminator21vdrive]

Have anymore of the inner fenders you built laying around? Currently building a 51 and could use a pair of those!

Nope one off

 

[CoolCruzin]

View attachment 1353028

Small in size
I need to get one for a job

 

[Cdog]

Small in size
I need to get one for a job

I have the big one too but this one gets used the most

 

[callbob]

Hardest part of that is centering the Saf T Steer. I am still not happy with mine after multiple attempts.

I watched a video put out by Safe T Plus on how to center it. Haven’t road tested it yet to check, but the old one I took off was centered so we will see. Now just need the Sumo springs to come in. I’m getting too old to be crawling around on the ground doing this shit. If it wasnt for air tools I would still be there.

 

[TPC]

Changed out the fan motor on the river AC.
24 year old USA built motor replaced with a China $29.
Fussy, frozen screws and frying pan white RV roof.
Been using my impact driver since I was 12 still using it today.

Works great now for dinner at Roadrunner.

View attachment IMG_3634.jpeg View attachment IMG_3634.jpeg