Dcb Mach 26 (help)

[N2DEEEP]

I have a 2002 DCB MACH 26. Does anyone know how to take off the side interior panel, where are the screws or hardware located? Any tips will help. I'm headed to the boat tomorrow and just need a little guidance to get started.

The amps are tucked inside and I need to access them to make some adjustments.
Heres a picture

 

[Good Stuff]

@02HoWaRd26 will be your guy. He’s taken everything apart to customize his boat.

 

[Guest06]

I’d need to see better photo’s, however it definitely looks like you’ll need to remove the seats, and I’m certain that the side panels are through bolted. Has carriage bolts that are glassed to the board, before they get vinyl lined.

 

[N2DEEEP]

I’d need to see better photo’s, however it definitely looks like you’ll need to remove the seats, and I’m certain that the side panels are through bolted. Has carriage bolts that are glassed to the board, before they get vinyl lined.

Appreciate the reply as always... I'll have to upload tomorrow when I'm there. I know they can come off, the stereo shop swapped the amps for me. I n0w wish I had them relocated to a more accessible location.

 

[Joe mama]

I’d need to see better photo’s, however it definitely looks like you’ll need to remove the seats, and I’m certain that the side panels are through bolted. Has carriage bolts that are glassed to the board, before they get vinyl lined.

I had a 2001 Mach and mine was as your saying.

 

[mattyc]

1/4"-20 through bolts. 7/16" nut on the inside, feel around from an opening

 

[N2DEEEP]

Peaked my head inside an opening at the bottom, saw 2 bolts at the top. They for have to be the ones!. Got discouraged for the amount of time I had…Seemed like I would have to unscrew the Passenger chair, and be careful with other stuff wired inside the panel as well. Luckily I was able to make the adjustments I needed, Pita! Not satisfied with the guess work I had to make on the amp tucked further in, so next time I come back, I’m taking that panel off.

Ps anyone here have experience with the smd dd1+ distortion detector?? Have a question