I know there's a few machinist on here and probably some peeps with a mill in their garage so figured I'd throw this up here.
I'm selling a "new" Servo power feed for a Bridgeport Series 1 machine. Servo part number is M-0225-140 which replaces a machine with a Bridgeport gearbox type power feed. It can be adapted to other machines with the appropriate kit from Servo.
Asking $750 obo for RD peeps
PLEASE READ THE ENTIRE DESCRIPTION TO UNDERSTAND THE CONDITION OF THIS ITEM.
I purchased this unit to retrofit to my machine which has a Bridgeport 6F power feed that was broken. In the process of preparing to install the unit a friend talked me into having the electronics for my 6F power feed repaired (extremely common for these units) and not installing this Servo brand power feed.
Unfortunately, after being unpacked the power cord was damaged and the wires were slightly cut about 4" from the plug (the unit was not plugged in or installed when this happened). I have repaired the cord with a high quality Marinco replacement plug which can be seen in the pictures. I also included a picture of the damaged cord before it was repaired. The unit is fully functional with no known problems.
A YouTube video of this Servo power feed in operation can be seen at [video=youtube_https;GBLrs6kBwCY]https://youtu.be/GBLrs6kBwCY[/video]
This power feed was never installed, and is basically new - the original tape from Servo is still covering the feed shaft holes in the unit - but the unit and some items were removed from the original packing and may show very slight signs of wear due to that. All original parts from Servo are included - the power unit, table adaptor, bushings, screws, etc.
The MSRP on this from Servo is around $1200. I am offering this at a significant discount from new but functionally it performs as new!!
located in Simi but can bring to my office in Torrance, or ship for a few $$.
Thanks,
Kevin (31O)892-2846
I'm selling a "new" Servo power feed for a Bridgeport Series 1 machine. Servo part number is M-0225-140 which replaces a machine with a Bridgeport gearbox type power feed. It can be adapted to other machines with the appropriate kit from Servo.
Asking $750 obo for RD peeps
PLEASE READ THE ENTIRE DESCRIPTION TO UNDERSTAND THE CONDITION OF THIS ITEM.
I purchased this unit to retrofit to my machine which has a Bridgeport 6F power feed that was broken. In the process of preparing to install the unit a friend talked me into having the electronics for my 6F power feed repaired (extremely common for these units) and not installing this Servo brand power feed.
Unfortunately, after being unpacked the power cord was damaged and the wires were slightly cut about 4" from the plug (the unit was not plugged in or installed when this happened). I have repaired the cord with a high quality Marinco replacement plug which can be seen in the pictures. I also included a picture of the damaged cord before it was repaired. The unit is fully functional with no known problems.
A YouTube video of this Servo power feed in operation can be seen at [video=youtube_https;GBLrs6kBwCY]https://youtu.be/GBLrs6kBwCY[/video]
This power feed was never installed, and is basically new - the original tape from Servo is still covering the feed shaft holes in the unit - but the unit and some items were removed from the original packing and may show very slight signs of wear due to that. All original parts from Servo are included - the power unit, table adaptor, bushings, screws, etc.
The MSRP on this from Servo is around $1200. I am offering this at a significant discount from new but functionally it performs as new!!
located in Simi but can bring to my office in Torrance, or ship for a few $$.
Thanks,
Kevin (31O)892-2846
