WELCOME TO RIVER DAVES PLACE

RV generator issue

SKIDMARC

Well-Known Member
Joined
Sep 30, 2011
Messages
3,614
Reaction score
4,197
So my RV generator won’t seem to stay on I replaced the carburetor the fuel filter the fuel pump did an oil change and an air filter change, and it still has the same issues. It will start is rough at idle and then shuts off. Full disclosure I did get the parts from Amazon, but it’s literally doing the exact same thing as prior to changing all these parts from OEM . Any ideas?
 
So my RV generator won’t seem to stay on I replaced the carburetor the fuel filter the fuel pump did an oil change and an air filter change, and it still has the same issues. It will start is rough at idle and then shuts off. Full disclosure I did get the parts from Amazon, but it’s literally doing the exact same thing as prior to changing all these parts from OEM . Any ideas?
Ruber fuel line from tank?
If so it probably dry cracked and sucking air.
 
95% of all issues are the carb. What are the error lights reading?
 
Spark plug wire
Ignition system wiring
 
I posted this in your other thread:

Have you tried running it with the fuel cap off or lose?
try running the choke at 1/2 as it sounds like its starving for fuel.

Any codes?
 
Another random note on my parents 06 toyhauler onan 5000 we went thru all the normal stuff. Fuel filter, fuel line, fuel pump, carb, spark plug, fuel can with a line right off the fuel pump.

Damn thing turned out to have a stuck/sticky intake valve! Had a sign of it also that whenever it did run or just start it would have a mist come back towards the air filter which we initially thought some back fire smoke.

Just another thing we have experienced.
 
Not sure what genset, but I just went through this all summer on an Onan Marquis Gold 5500 and I had to replace the ECU. It was throwing code 14 which can be so many different things.
 
So my RV generator won’t seem to stay on I replaced the carburetor the fuel filter the fuel pump did an oil change and an air filter change, and it still has the same issues. It will start is rough at idle and then shuts off. Full disclosure I did get the parts from Amazon, but it’s literally doing the exact same thing as prior to changing all these parts from OEM . Any ideas?
disconnect the fuel line and hit the prime button to fill a bowl to check for water in the fuel. ps on onan generators if you dont put the door back on twhile running it will shut off within 3 minutes. the door is part of the air cooling system.
 
What generator model is it? Some of the Onan's I've seen the remote start deal in the cabin cause issues. Depending on the setup, sometimes you can just unplug it and try the outside. Some coaches have timers for charging the coach batteries, if yours has it, make sure it switched off, as the "quiet times" may be miss adjusted. The Onan 4k, the green box types, have a circuit board that goes bad. They'll usually light off and die, but usually just a couple seconds.
Also, check the auto choke bs. Seen them run and then flip closed, killing the motor.
 
I know you already replaced the fuel pump, but I’d try again. Or at least get a fuel pressure gauge on it. All my Onan generators have eaten fuel pumps. So much in fact I keep an extra fuel pump in the motorhome at all times. I’ve replaced them on the side of the road many times.

I put this Holley electric fuel pump on 2 years ago and have had zero problems since. https://www.amazon.com/Holley-12-42...1791231381&sprefix=holley+furl,aps,278&sr=8-1
 
Not sure what genset, but I just went through this all summer on an Onan Marquis Gold 5500 and I had to replace the ECU. It was throwing code 14 which can be so many different things.
I replaced mine in my old motorhome with an aftermarket one and quit having all the BS Onan faults all the time.
 
Its the Amazon carb, very often you get a crappy one...I put one on my generator a few years ago and it wouldn't run, so I busted out the wallet and bought an OEM one, and it ran perfectly after that...

My buddy is a mobile rv mechanic and he says he will not put an Amazon carb on for anyone if they ask him to....he said that too many time he put one on and it didnt run right, and the customer would expect him to put another one at no charge...so he said now he just politely declines the job if they ask him to install a cheap carb...
 
Also check the oil, if too much it will turn itself off as well. What is the error code?
This was mine when i got it. Just changed the oil today. Never had the issue since i staryed servicing myself.
 
Had one that was on slides….it would run great when it was slid out but quit when you pushed it back in….it was pinching the rubber fuel line. Doubt this helps but something to consider.

I’d try to run it from a gas can with a piece of hose stuck in it to rule out a fuel supply side issue
 
Amazon starter solenoids can be bogus too.
Jus’ sayin’.
 
Hate to ask, but, how much fuel in your RV? Mine shuts down at 1/4 tank, and sounds exactly like what your experiencing
Yes, this ^^^^^^ happens when there only one fuel tank on board. If he has a WW then it would have it's own Gen fuel tank.

No type of Gen mentioned, but I take a guess that it's an Onan Marquis gold 5500 or 7000 🤔
It sounds like the carb, fuel or spark plugs, if it starts and shuts off, to the left of the oil dipstick there's an oil level sensor, check the spade connector it could be loose or it needs to be replaced.
If you were in N. OC I'd come by and help you figure it out.
 
You can also try checking the hertz coming from an outlet when it starts running. Had an issue with mine, if the rpm is too high and the hertz is higher than 64-68 it will shut off. Should be 60-63 hz. Adjust it with the idle spring.
 
Its the Amazon carb, very often you get a crappy one...I put one on my generator a few years ago and it wouldn't run, so I busted out the wallet and bought an OEM one, and it ran perfectly after that...

My buddy is a mobile rv mechanic and he says he will not put an Amazon carb on for anyone if they ask him to....he said that too many time he put one on and it didnt run right, and the customer would expect him to put another one at no charge...so he said now he just politely declines the job if they ask him to install a cheap carb...
Onan marine dealer here and have messed with a lot of the RV Onan units. All my friends bought the Amazon Carbs and they all regretted it. Onan carb only!!!
 
Thank you for all the replies. The generator is an Onan RV OG 5500. Green box. I had my mobile RV guy come out. Says the error code is 36 which could mean a number of things. He saying it's the circuit board. He is going to rebuild the card and put in a new circuit board. shits expensive.
 
Yes, this ^^^^^^ happens when there only one fuel tank on board. If he has a WW then it would have it's own Gen fuel tank.

No type of Gen mentioned, but I take a guess that it's an Onan Marquis gold 5500 or 7000 🤔
It sounds like the carb, fuel or spark plugs, if it starts and shuts off, to the left of the oil dipstick there's an oil level sensor, check the spade connector it could be loose or it needs to be replaced.
If you were in N. OC I'd come by and help you figure it out.
Oil level is fine, just did an oil change
 
Had one that was on slides….it would run great when it was slid out but quit when you pushed it back in….it was pinching the rubber fuel line. Doubt this helps but something to consider.

I’d try to run it from a gas can with a piece of hose stuck in it to rule out a fuel supply side issue
It's not mounted to a slide.
 
disconnect the fuel line and hit the prime button to fill a bowl to check for water in the fuel. ps on onan generators if you dont put the door back on twhile running it will shut off within 3 minutes. the door is part of the air cooling system.
I did put the door back on multiple times, still shut off.
 
Also the killer part to me is the thing only has just over 300 hours on it.
 
Thank you for all the replies. The generator is an Onan RV OG 5500. Green box. I had my mobile RV guy come out. Says the error code is 36 which could mean a number of things. He saying it's the circuit board. He is going to rebuild the card and put in a new circuit board. shits expensive.
I looked up error 36 and it mentions an oil sensor shutoff. From my experience with Honda small engines with this sensor is that the sensor fails and will cause what you're describing in your first post. On the Honda I just unplug the thing. I dunno if unplugging on an Onan will work.
 
I looked up error 36 and it mentions an oil sensor shutoff. From my experience with Honda small engines with this sensor is that the sensor fails and will cause what you're describing in your first post. On the Honda I just unplug the thing. I dunno if unplugging on an Onan will work.
He did mention something about the oil sensor, but not that it was an issue, we was ratling so many things about these things that I lost track. LOL
 
Find the sensor and unplug it and see if it runs correctly. Check the oil prior though.
That might not work. An oil level sensor usually completes a circuit. Unplugging it opens the circuit.

You would have to jumper the connector.

Good suggestion though-
 
I can share this...the aftermarket parts are generally junk.
It is a hassle sometimes to get factory parts like carb, fuel pump, etc...but it is worth it.
My 2024 genesis has a Onan 5000 evap in it and it has been good so far,,the 4000 in our old POS Attitude ate two fuel pumps.
I did a ton of fiddling with it and got it happy. Then we got rid of the thing.
I would make damn sure fuel is flowing, and test that oil pressure sensor for sure.
I run Lucas fuel stabilizer in the genny/toy tank every time we use the rig, and I think it makes a difference.
 
I had some weird power issues going on with my 5500 in my toy hauler. So I took the trailer to a place in irwindale that does service on them. Ended up replacing the carb, and doing a full service on it, check valve clearance, oil change etc. Its worked great ever since, and now I just make sure to run it once a month ( I had a time where it sat for 2 .months at the river)
I've never had good luck with the Amazon carbs.
 
I can share this...the aftermarket parts are generally junk.
It is a hassle sometimes to get factory parts like carb, fuel pump, etc...but it is worth it.
My 2024 genesis has a Onan 5000 evap in it and it has been good so far,,the 4000 in our old POS Attitude ate two fuel pumps.
I did a ton of fiddling with it and got it happy. Then we got rid of the thing.
I would make damn sure fuel is flowing, and test that oil pressure sensor for sure.
I run Lucas fuel stabilizer in the genny/toy tank every time we use the rig, and I think it makes a difference.

The Onan 5500 on my 2023 Genesis has been a PIA from day one....and both Cummins and Genesis wouldn't do anything about it.....it still doesnt work right to this day...
 
That might not work. An oil level sensor usually completes a circuit. Unplugging it opens the circuit.

You would have to jumper the connector.

Good suggestion though-
I tell people treat it like a toggle switch that works automatically and sometimes it dosen't.
Very first I do with anything like this is jumper the safetys.
 
I looked up error 36 and it mentions an oil sensor shutoff. From my experience with Honda small engines with this sensor is that the sensor fails and will cause what you're describing in your first post. On the Honda I just unplug the thing. I dunno if unplugging on an Onan will work.
too much oil will turn it off as well. Doesn't take much either. Error 36 should be an easy fix
 
too much oil will turn it off as well. Doesn't take much either. Error 36 should be an easy fix

How much is too much oil?

I did the oil change made sure it was level and filled the oil to the top of the dip stick. If error 36 is an easy fix, what is the fix? Based on what I am finding it could be:

Failing Fuel Pump- just replaced
Fuel Supply& Filters- just replaced both, but I will pull the fuel line to see if fuel is getting pumped appropriately.
Carburetor issues-replaced, granted with Amazon one, but it's doing the exact same thing it was doing before with OEM which would indicate that wasn't the issue.
Oil Level -I can check the oil level again, but just did an oil change 15-20 hours ago or 2 months ago. Ran ok for 15-20 hours, not sure why it would all the sudden have oil level issues
Oil Pressure-I will disconnect the oil pressure sensor to see what happens
Control Board/Inverter- The only thing not addressed. which i why my mechanic feels this is the issue, apparently he says its a know issue with these genes.
 
I am thinking a cracked fuel line from the tank to the fuel pump
The gas tank is close to the generator, if the fuel line was cracked letting in air, I would assume it would be leaking fuel also, I see no fuel leaks.
 
How much is too much oil?

I did the oil change made sure it was level and filled the oil to the top of the dip stick. If error 36 is an easy fix, what is the fix? Based on what I am finding it could be:

Failing Fuel Pump- just replaced
Fuel Supply& Filters- just replaced both, but I will pull the fuel line to see if fuel is getting pumped appropriately.
Carburetor issues-replaced, granted with Amazon one, but it's doing the exact same thing it was doing before with OEM which would indicate that wasn't the issue.
Oil Level -I can check the oil level again, but just did an oil change 15-20 hours ago or 2 months ago. Ran ok for 15-20 hours, not sure why it would all the sudden have oil level issues
Oil Pressure-I will disconnect the oil pressure sensor to see what happens
Control Board/Inverter- The only thing not addressed. which i why my mechanic feels this is the issue, apparently he says its a know issue with these genes.
My bad I thought Error 36 was oil level sensor. My experience with these Generators is don't over think. If the oil change was 15-20 hours ago, it isn't the Oil level for the most part. I would still think it is carb, the Chinese carbs can be perfect or useless, super inconsistent. If the Genny runs for a couple of 3-4 minutes then dies, I would still say carb. They clog easy, even the OEM. I have seen people go thru 3 Chinese carbs before they find one that works, for myself I buy the OEM.

Let us know what the mechanic fixes and if it works.
 
My bad I thought Error 36 was oil level sensor. My experience with these Generators is don't over think. If the oil change was 15-20 hours ago, it isn't the Oil level for the most part. I would still think it is carb, the Chinese carbs can be perfect or useless, super inconsistent. If the Genny runs for a couple of 3-4 minutes then dies, I would still say carb. They clog easy, even the OEM. I have seen people go thru 3 Chinese carbs before they find one that works, for myself I buy the OEM.

Let us know what the mechanic fixes and if it works.

All good points. He is going to rebuild the OEM carb and install the new control board/ECU whatever its called. I like to fix things myself, but I know when I need someone who knows more than me, even though it cost $$.

But I will give a few of the suggestions made here a shot tonight, he is supposed to install everything tomorrow once he gets the new control board.

I need the RV ready for this weekend. Shit always happends when you need it to work. LOL

I will keep everyone posted. Thanks for all the feedback!
 
The gas tank is close to the generator, if the fuel line was cracked letting in air, I would assume it would be leaking fuel also, I see no fuel leaks.
Not necessarily. Unless there is a fuel pump, pushing air through the line, and if that was the case, it wouldn’t be sucking air through that line.
 
I cant remember what code mine was. But basically i go to about half on the stick. When its full as it heats the oil thins and with too much splashes the sensor. Just check it periodically make sure it hasnt gone down. Add if needed.
 
All good points. He is going to rebuild the OEM carb and install the new control board/ECU whatever its called. I like to fix things myself, but I know when I need someone who knows more than me, even though it cost $$.

But I will give a few of the suggestions made here a shot tonight, he is supposed to install everything tomorrow once he gets the new control board.

I need the RV ready for this weekend. Shit always happends when you need it to work. LOL

I will keep everyone posted. Thanks for all the feedback!
Did you get this resolved? I found a new circuit board for a 5500 that I had bought for a spare if you need it.
 
How much is too much oil?

I did the oil change made sure it was level and filled the oil to the top of the dip stick. If error 36 is an easy fix, what is the fix? Based on what I am finding it could be:

Failing Fuel Pump- just replaced
Fuel Supply& Filters- just replaced both, but I will pull the fuel line to see if fuel is getting pumped appropriately.
Carburetor issues-replaced, granted with Amazon one, but it's doing the exact same thing it was doing before with OEM which would indicate that wasn't the issue.
Oil Level -I can check the oil level again, but just did an oil change 15-20 hours ago or 2 months ago. Ran ok for 15-20 hours, not sure why it would all the sudden have oil level issues
Oil Pressure-I will disconnect the oil pressure sensor to see what happens
Control Board/Inverter- The only thing not addressed. which i why my mechanic feels this is the issue, apparently he says its a know issue with these genes.

IF it dies when rolling then try sucking (top side changer) / or draining half a pint out.
 
Back
Top