WELCOME TO RIVER DAVES PLACE

UTV information thread Take 1?

Their sales guy told me that at least ten times last time I saw him.

I’ll be asking Andrew, the service guy about it. Perhaps things have changed since I last askied about it.

I do want to say I had hear rumor (a few months back) that one may be coming out.

Any info on the manufacture or, even better, a website or other forum discussions online? I’d definitely be interested in doing a SC since I was told that the Kawi warranty is solid regardless of how you augment the motor.

I think if you could squeeze 200 HP or more out of the ridge, it would be a different buggy altogether.
 
Only a matter of time before they were down to 19 grand.


Another game changer for 23.




Lots of deals on these speeds!
To be fair. Both of these cars are going on 4 model years old. Both are early number cars and purchased at $30-32K. And they don’t have the past couple years of factory improvements on them. The milage on both could mean some costly services are needed or needed soon, if not already done. And they are in Utah which is better then the east coast, but probably less interest in the Speed vs a Kawasaki or Polaris which are more popular and suited for their terrain. And let’s face it the Speed is not a desired used vehicle, and the lasted number told as a week or two ago, Speed has sold just under 1800 cars in total. So not allot of cars to be seen and attract more buyers.

The design has so much potential, just got lost in execution and management.
 
Only a matter of time before they were down to 19 grand.


Another game changer for 23.




Lots of deals on these speeds!
Don't tell LOF the prices are falling. He says they have the best resale value. LOL!!!

They are going on being 4 years old so that pricing about right.
 
To be fair. Both of these cars are going on 4 model years old. Both are early number cars and purchased at $30-32K. And they don’t have the past couple years of factory improvements on them. The milage on both could mean some costly services are needed or needed soon, if not already done. And they are in Utah which is better then the east coast, but probably less interest in the Speed vs a Kawasaki or Polaris which are more popular and suited for their terrain. And let’s face it the Speed is not a desired used vehicle, and the lasted number told as a week or two ago, Speed has sold just under 1800 cars in total. So not allot of cars to be seen and attract more buyers.

The design has so much potential, just got lost in execution and management.
Don't tell this to all the Havasu ballers who think they are gonna get 60 grand for their "game changers"
 
Nothing new here
The big new is all cars will come standard with the Speed clone KWI clutch, and larger cooling package and air to air inner cooler. For the Speed cars this is a significant improvement. I’ve heard they were going out some better bearings & hardware in the trans & dif, but I’m told it’s not happened or been seen yet.

What’s going to be bigger for Speed is if the new Hisun enclosed cab utility is private labeled and badged as a Speed. This will greatly help Speed offer another demographic a Speed vehicle.

Here is a few pictures of the expected 2027 Hisun HVAC utility coming out sometime next year.

IMG_6707.webp
IMG_6706.webp
IMG_6709.webp
 
The big new is all cars will come standard with the Speed clone KWI clutch, and larger cooling package and air to air inner cooler. For the Speed cars this is a significant improvement. I’ve heard they were going out some better bearings & hardware in the trans & dif, but I’m told it’s not happened or been seen yet.

What’s going to be bigger for Speed is if the new Hisun enclosed cab utility is private labeled and badged as a Speed. This will greatly help Speed offer another demographic a Speed vehicle.

Here is a few pictures of the expected 2027 Hisun HVAC utility coming out sometime next year.

View attachment 1663521View attachment 1663522View attachment 1663523
Looks like mini bronco's I am sure ford will be thrilled.
 
My AZ sales rep stopped in there yesterday. They are ordering a few HCR mid-travel kits for those supercharged Kawie Ridge builds, so I'm excited to hear how the visit went.

Any info on the supercharger for the Ridge?
 
Can we get 3 different SxS forums please?

1. For the people that Still think Speed is the shit.

2. For the homos that think an enclosed SxS is actually cool.

3. And one for experienced off-roaders.

Yeah, that's the ticket. 👍🏼😁

lol. Yea, enclosed SxS are actually cool - as in 40 degrees less inside mid summer in Havasu. Plus, killer stereo you can actually hear and zero dust in your face. Makes it pretty decent for those of us at the elder end of the demographics.

Regardless, like any other off road / trail vehicle, nothing wrong with chasing more HP, better handling and more travel.
 
  • Like
Reactions: DWC
lol. Yea, enclosed SxS are actually cool - as in 40 degrees less inside mid summer in Havasu. Plus, killer stereo you can actually hear and zero dust in your face. Makes it pretty decent for those of us at the elder end of the demographics.

Regardless, like any other off road / trail vehicle, nothing wrong with chasing more HP, better handling and more travel.

We have found the moderator for the homo forum.

Next! 😁
 
Call Riverrat motorsports
My AZ sales rep stopped in there yesterday. They are ordering a few HCR mid-travel kits for those supercharged Kawie Ridge builds, so I'm excited to hear how the visit went.
Surprised the place is still open.
Heard they haven't sold anything.
I walked in one time and the manager told me to come back when they were open. lol
One guy walked out with a bag of parts, 4 people around the sales desk, lights were on and door was open.
Went down the street and bought a bike.
Tried buying the Kawi H2 and they wouldn't budge on price, sales guy said his hands were tied.
 
The big new is all cars will come standard with the Speed clone KWI clutch, and larger cooling package and air to air inner cooler. For the Speed cars this is a significant improvement. I’ve heard they were going out some better bearings & hardware in the trans & dif, but I’m told it’s not happened or been seen yet.

What’s going to be bigger for Speed is if the new Hisun enclosed cab utility is private labeled and badged as a Speed. This will greatly help Speed offer another demographic a Speed vehicle.

Here is a few pictures of the expected 2027 Hisun HVAC utility coming out sometime next year.

View attachment 1663521View attachment 1663522View attachment 1663523
The Mini vans of the desert!😅

Save a shit ton of money, buy an old Mitsubishi. 👍🤣
Screenshot_20261119_202247_Facebook.webp
 
lol. Yea, enclosed SxS are actually cool - as in 40 degrees less inside mid summer in Havasu. Plus, killer stereo you can actually hear and zero dust in your face. Makes it pretty decent for those of us at the elder end of the demographics.

Regardless, like any other off road / trail vehicle, nothing wrong with chasing more HP, better handling and more travel.
This statement got me thinking, I know in AZ it doesn't apply but in helmet states do you have to still wear one in the enclosed? I imagine you do since it has to do with CC's but think they would make it harder to drive in CA inside with a helmet but I don't know.
 
This statement got me thinking, I know in AZ it doesn't apply but in helmet states do you have to still wear one in the enclosed? I imagine you do since it has to do with CC's but think they would make it harder to drive in CA inside with a helmet but I don't know.
Yes it will still be required.

You can wear an open face or skid lid. I know some guys in their luxury prerunners run those rally car open face with half chin for the mic’s
 
Surprised the place is still open.
Heard they haven't sold anything.
I walked in one time and the manager told me to come back when they were open. lol
One guy walked out with a bag of parts, 4 people around the sales desk, lights were on and door was open.
Went down the street and bought a bike.
Tried buying the Kawi H2 and they wouldn't budge on price, sales guy said his hands were tied.
Ahh...this is the one you were talking about.

I was all excited, but the rep that was there never got back to me. Maybe that's why...
 
All (potential) skepticism aside, River Rat got the HCR kit, the wheels and the 35s installed on our Ridge. Pretty happy with the way it’s coming out. They are working on the electronics now.

A full matching bed shell is next. Just need to find one..

124013.webp
013931.webp
 
The big new is all cars will come standard with the Speed clone KWI clutch, and larger cooling package and air to air inner cooler. For the Speed cars this is a significant improvement. I’ve heard they were going out some better bearings & hardware in the trans & dif, but I’m told it’s not happened or been seen yet.

What’s going to be bigger for Speed is if the new Hisun enclosed cab utility is private labeled and badged as a Speed. This will greatly help Speed offer another demographic a Speed vehicle.

Here is a few pictures of the expected 2027 Hisun HVAC utility coming out sometime next year.

View attachment 1663521View attachment 1663522View attachment 1663523

Do you think Robby Gordon is so protective of his patents because he copies everyone else's lack of patents?
 
Do you think Robby Gordon is so protective of his patents because he copies everyone else's lack of patents?
I think Robby is protective of his patents because he believes they are truly valuable and keep anyone from building what he has. But in reality I don’t think most of his patents would stand if contested. He has used intimidation to keep people from challenging them. But the other brands who have ignored his so called patents have not been sued by Robby or Speed UTV. Why is that?
 
I think Robby is protective of his patents because he believes they are truly valuable and keep anyone from building what he has. But in reality I don’t think most of his patents would stand if contested. He has used intimidation to keep people from challenging them. But the other brands who have ignored his so called patents have not been sued by Robby or Speed UTV. Why is that?

Probably because they haven't turned a profit yet! 😁
 
The patent ignores are Polaris, Can Am, CFMOTO. They are making serious profits.

I was thinking you were talking about Aftermarket replacement parts.

I'm gonna guess those manufacturers have Way deeper pockets that Speed?

🤔
 
Is there one specific or is it across the board?
Robby filed a patent that says only he can mount the front shock off the lower a-arm, which we all know is a stretch. Same with using a uni-ball in place of ball joint and he has a patent for the a-arms being reversible and used on both asides of the car.

Both Polaris & Can Am mount shocks off the lower front suspension arm and Robby knows better than try to enforce his patent. Some with using hiems and uni-balls on the suspension a-arms. Polaris does this on their factory race car arms and every aftermarket company offers hiemed suspension.

Robby filed a patent that only he can ad a A+ bar at the roll cage A pillar that extends to the chassis.

CFMOTO has added this tube on the new Z10, and Polaris added a very small version of this secondary tube on the RZR XP. How many aftermarket UTV cage builders offer this, and every off road race cars and truck have this tube. How many race cars including nascar have a A plus pillar. They all do!

Robby filed a patent that only he can mount a turbo and engine intake behind the rear center line of the engine. (Back side of the engine)

CFMOTO mounted the Z10 turbo & intake behind the center line of the engine.

Robby has a patent saying only he can incorporate a vent into the roof panel.

The Polaris Boost, Can Am Mav R and CFMOTO Z10 all have optional roof vents.

If these patents were enforceable and solid Robby would be suing all these major brands for tens of millions for infringement. Those companies have teams and departments that just verify that their ideas and designs are not infringing on another patent.

Robby also has patented the rear trailing arm on the Speed UTV which has been used on every buggy and VW since the 70’s. Robby has a patent saying only he can run a front position steering system, which again most automotive manufacturers use on their vehicles and every off road buggy, truck etc uses front steering. Robby has patents V bars in the front windshield, a tube down the center of the roll cage and diagonal tubes in the rear center of the roll cage. Oh he's even filled a patent for opening window nets. On and a modular chassis that can bolt together. Every RZR has had a bolt together main chassis.

You can pay and file patents for whatever you want it’s your responsibility to file prior art or how your design is different enough to grant a new patent. But if someone contests the patent and if found correct, your patent become void. So if Speed tries to sue for patent infringement, his patents will get contested and if the defendants can prove it was done before him or prior published art. Robby’s patents become void.
 
Last edited:
Back
Top