Current Situation - a picture thread

[HNL2LHC]

Love the indoor / outdoor bar set up! Are you going to do an accordion window or pop up, or? Kitchen on the otherside of the bar?

Gonna be sweet!

Thanks @Tank. There is a bar top on the outside. The kitchen is to the inside of that window. It is the counter sink area. That window is a multi-slide door with all panels that slide. Counter is flush on both sides. We finished the interior and The counter was installed after I left town. I do not have any good images at this time. One of the things that I don’t like about the desert is that there are only a few days or weeks that you can enjoy true indoor outdoor living. While folding doors are the latest craze and we do a fair amount of them they are not my go to for many reasons.

Here is the inside of that window.

 

[Tank]

Thanks @Tank. There is a bar top on the outside. The kitchen is to the inside of that window. It is the counter sink area. That window is a multi-slide door with all panels that slide. Counter is flush on both sides. We finished the interior and The counter was installed after I left town. I do not have any good images at this time. One of the things that I don’t like about the desert is that there are only a few days or weeks that you can enjoy true indoor outdoor living. While folding doors are the latest craze and we do a fair amount of them they are not my go to for many reasons.

Here is the inside of that window.

View attachment 1503556

LOVE LOVE LOVE that.

why do you say you can't use it much? Heat?

 

[69hondo]

That doesn’t look like your eliminator…

It’s my new to me Eliminator

 

[HNL2LHC]

LOVE LOVE LOVE that.

why do you say you can't use it much? Heat?

Heat or cold as the seasons changes. Winters are great as I open the doors in the morning to get the free cold air. I could see fall is the time that we might use the pass through most often. Warm pool temps still and cooler air. But the question is is anyone in town at the time. So I kept it simple unlike this house in Kapalua.

Unlike our home in Hawaii where EVERY day the doors are opened when we are in the house.

Then there is this but Havasu contractors struggled with the engineering of the little openings.

https://www.realtor.com/realestateandhomes-detail/210-Naio-Pl_Lahaina_HI_96761_M76209-55739?from=srp-list-card

I would have been better off scrapping the middle of the house and build It with a flat roof and 10’ ceilings, including a large entry and patio. Thinking that is the route when we renovate our son’s Havasu home.

 

[JL95]

Can I be your son lmao

 

[DalesSpeed]

It’s my new to me Eliminator

Congrats! When do we get to see it?

 

[69hondo]

Congrats! When do we get to see it?

Soon, still trying to get home. It’s been a rough one. lol wife’s sub engine gave up.

 

[ChrisV]

Sometimes I get cool stuff in the shop.

 

[HNL2LHC]

Sometimes I get cool stuff in the shop.

View attachment 1503665 View attachment 1503666 View attachment 1503667 View attachment 1503668

“Sometimes”?!?!?! I’d have to say MOST of the time. Thanks for sharing.

 

[Your ad here]

 

[HNL2LHC]

Went out for a little walk this afternoon a little spot….

 

[HNL2LHC]

It was a little windy which was nice and kept it cool.

 

[Eliminator21vdrive]

View attachment 1503868

Carb compliant lol

 

[MissB]

View attachment 1502826 View attachment 1502827 Temecula Rod run. Lots of nice stuff.

Dang, I was gonna go to that, bummed I missed. I have a friend w/ a 65 Convertible Vet, Tiffany blue & white, she loves these things, but she was out w/ her boyfriend, doing boyfriend things... Next year! Looks fun

 

[throttle]

Muddy today

 

[2Driver]

 

[throttle]

 

[J&k beer can]

finally getting to it....
I Did a mock-up of upper a-arm and test fit parts.. bought entire global west set-up with viking shocks..

 

[4Waters]

finally getting to it....
I Did a mock-up of upper a-arm and test fit parts.. bought entire global west set-up with viking shocks.. View attachment 1504296 View attachment 1504297 View attachment 1504298

69 Mustang, correct?

 

[J&k beer can]

69 Mustang, correct?

yes

 

[4Waters]

yes
View attachment 1504317

Doing a 9in in my 69 FB right now

 

[jeteater1]

Getting ready to adopt two donkeys for protection for our soon to be cows and pigs. But first helping my girlfriends daughter get the barn ready for chickens.

 

[throttle]

It was a little windy which was nice and kept it cool.

View attachment 1504016

Kahala tomorrow for 1 nite, just saying…

 

[Ducksquasher]

Getting ready to adopt two donkeys for protection for our soon to be cows and pigs. But first helping my girlfriends daughter get the barn ready for chickens. View attachment 1504392 View attachment 1504393 View attachment 1504394 View attachment 1504395

So awesome...jealous!

 

[SoCalDave]

Renovating an apartment in the old Kress Department Store building in DTLB.

 

[HNL2LHC]

Kahala tomorrow for 1 nite, just saying…

I might be able to make it. Where we eating and what time?

 

[DUNEFLYER]

Annual time again.
Love the Beech landing gear.

 

[Sleek-Jet]

The 24v gear is so much faster than the 12v. Our Debonair takes a good 8-10 seconds.

 

[Your ad here]

 

[War Canoe]

One of my favorite spots in boating…..Feather Falls, Lake Oroville

 

[UltraLucky]

Kahala tomorrow for 1 nite, just saying…

Nice beach and love the dinner seafood buffet. always feel bad for the Dolphins

 

[throttle]

I might be able to make it. Where we eating and what time?

Reso at resort at 6, but might be lazy and eat at pool bar.

 

[beerrun]

So the new house in Bullhead had this stupid sink that we hated got it replaced today

 

[HNL2LHC]

So the new house in Bullhead had this stupid sink that we hated got it replaced today View attachment 1504801 View attachment 1504802 View attachment 1504803 View attachment 1504804

Love it!!!! Gotta have another party to be sure everything is working right. Name the date and time. We know the address. @Jefftowz you guys in for this too? Love our square sinks. Get ready to clean the corners. I find bar keeper’s friend, microfiber and a knife will help you get Into the tight corners.

 

[SoCalDave]

In Laguna Beach this morning

installing French doors on an interior bedroom. This place is 5 stories high and has 2 elevators...thank God for that...

 

[HBCraig]

At LMU playing watching the daughter
The National Anthem shut off and our team finished it by singing.

 

[HNL2LHC]

In Laguna Beach this morning View attachment 1504846 View attachment 1504847 View attachment 1504848 installing French doors on an interior bedroom. This place is 5 stories high and has 2 elevators...thank God for that...

You should offer American doors as you don’t have the added cost of tariffs.

 

[beerrun]

Finished

 

[Mrs. Riley1]

Friday morning ski sessions are back!

 

[4Waters]

Friday morning ski sessions are back!
View attachment 1504889 View attachment 1504890 View attachment 1504891 View attachment 1504893

I'm a little jealous.... ok, a lot jealous

 

[SoCalDave]

You should offer American doors as you don’t have the added cost of tariffs.

Every door and window we install is made in the good old USA with 85-90% being manufactured here in So Cal.

 

[Morehart]

Friday morning ski sessions are back!
View attachment 1504889 View attachment 1504890 View attachment 1504891 View attachment 1504893

Family ski time!!!! Awesome

 

[TX Laramie]

Finished View attachment 1504886

Vedy nice

 

[Morehart]

pulled the old 450r out just in time for the heat!

 

[HNL2LHC]

Every door and window we install is made in the good old USA with 85-90% being manufactured here in So Cal.

but you still call them ”French”. You should be calling them American Doors just like American Fries.

 

[69hondo]

 

[HNL2LHC]

View attachment 1504986

Red adn Green Skittles theme keeps rolling…..

 

[Eliminator21vdrive]

Finished View attachment 1504886

Is that a costco kit>

 

[beerrun]

Is that a costco kit>

No we bought it at home depot before we saw the one at Costco. We got 16 gage and I think the Costco one is 18 gage

 

[Sandlord]

Happy Saturday