WELCOME TO RIVER DAVES PLACE

v-drive

  1. Who Let The Dogs Out?  The 6th Annual Dog & Andy’s Vdrive Run returns to Windmill Cove.

    Who Let The Dogs Out? The 6th Annual Dog & Andy’s Vdrive Run returns to Windmill Cove.

    Last weekend, all the dogs came out to play on the Northern California Delta for the 6th Annual Dog & Andy’s Vdrive Run at Windmill Cove Bar & Grill. Located just outside of Stockton, CA, the venue has been home to the event since its inception. Despite what the name implies, this...
  2. D

    WTT- for V-Drive, Flatty or Daycruiser - 56 Ford Flatbed Half Breed

    Not even sure if Dave will allow this, but here goes. I'm wanting to trade for a flatbottom or daycruiser, V-drive... Something leaning towards the bench-seat vintage flatty era, as opposed to the radical two-seater blast beast. I already have a fast enough Hallet Vector, but like I said, I'm...
  3. C

    (SOLD) 1975 Howard Bubble Deck Runner Bottom

    New restoration boat has been started but hasn’t been back in the water. 454 $15000 Located in Simi Valley, CA
  4. C

    1969 Hondo 18’

    New restoration - motor has been tuned and boat ran once 440 Chrysler .030 over with aluminum heads New imco stainless tanks Trailer rebuilt by Giroux Custom Cover Bassett headers if interested Polished and new chrome $15000 located in Simi Valley, CA
  5. pull-on

    1973 Kurtis 500 Blown V-drive

    Posting this for my buddy..... IF INTERESTED, CONTACT..............BRYAN (714) 336-8393 Call or text. Price is negotiable $20k OBO 1973 Kurtis 500 circle boat. Blown FE390, fresh blower, carbs, and ignition system. Tuned to run on 110 Octane. New plumbing, new battery, new starter...
  6. wettrthebettr

    [WTS] 1971 CAMPBELL 20FT V-DRIVE , NOT FOR SALE ANYMORE

    I decided not to sell this Beautiful, Restored Classic with ALL NEW parts, I mean ALL new parts. See ya at the Spring Round-Up. I do not know how to remove this for sale ad. PJ 1971 Campbell, 20 ft, 454 BBC with Chevy Turbo 400, Ace Champion V-Drive TWO NEW below deck 25 gallon Aluminum Fuel...
  7. krswes

    Dog & Andy’s V-Drive Video

    Check Out Dog & Andy’s V-Drive Event Video by KKJ Media. KKJMedia.com Instagram- KKJMedia1 Facebook- KKJMedia YouTube- KKJMedia
  8. wettrthebettr

    DRIVE SHAFT

    Drive Shaft 21" to 24" Slip yoke Came out of a V-DRIVE $80 Call 530 575 5025
  9. wettrthebettr

    CAV PLATE-SOLD

    SOLD I Have a Cavitation plate assembly, and pedal rod and raw water pick up SS hose The chrome is in Pretty good shape, slight signs of ageing, a couple blocks have spots The SS Hose is 16" long with adapter to plate The assembly is broke down for easy pick up. Asking $500.00
  10. wettrthebettr

    4" Through Hull Tail Pipes wanted

    Looking for 4" Through Hull Tail Pipes or I could trade my 3" Through hull tail pipes for a set of 4" Call 530-575-5025 or pm me, thanks
  11. wettrthebettr

    Looking for A Gen 4 454 is NOT needed, i found a nice one.

    454 is not needed anymore found one . Looking for A Gen 4 454 block or used running Engine for Christmas. I'm about ready for a Gen 4 454 for my Campbell, I'd rather build one up, But it looks like time and cost is a issue, and being the last big Item I'll be needing. A used good running...
  12. wettrthebettr

    Setting up a 454 for 20.5 Campbell

    found my engine on post 22 I have a question about setting up a 454 for a 71 Campbell 20.5 ft cruiser. I received my boat with no engine, So I am getting ready to set up a 454 for the cruiser. Yesterday I looked at a 454 late 73 - 85,# 361959, freshly built with a Summit 1302 Cam.540 lift...
  13. Andrew6183

    1987 Campbell Classic 20

    The last Classic 20 ever made! Looking to sell our 87 Campbell Classic 20 V-Drive. Currently less motor. It came with a Ford 427 side Oiler but now it’s in pieces and ready to part out. Here’s the rundown given my short experience with it: Bought the boat in June as the 4th owner, the guy...
  14. wettrthebettr

    72C Velet drive part not needed, selling without the out put tail

    I have a 72C Velvet Drive Model # 10-18-014 without the output coupling. Does anyone know what is missing and where to get one Is there a plate to install with a outlet Flange to block oil passages? My drive shaft has a slip yoke and at each end the bolt pattern is 2 1/2 X 2 7/8. Thanks, PJ
  15. wettrthebettr

    V-drive stuffing box Identification for parts

    This stuffing box was in my Campbell, and I would like to know what band is it so I can replace the Dual lip seals that look like a Glide, but it is not mine has a grease fitting. Can those seals get replaced with an automotive wheel seal? The other is a strut bushing easy find Thank you, PJ
  16. classicvdrives

    21' VDrive Day Cruiser - for sale $12k

    Deleted
  17. wettrthebettr

    Putting A 72 Campbell back together

    Hello, I have been looking to purchase A Spectra or a Campbell. The Spectra I have doubts about There is a 1972, 20.5 ft Campbell I am interested in, All the interior has been removed. it is really is a 1971 All the interior is there and in good shape, Except the 455 olds engine. The 455...
  18. B

    V-Drive Purchase Questions

    Hi, I'm looking to buy a V-Drive, preferably a Howard or Sanger with a BBC. I've never owned one before and I am wondering what I should look for to make sure it is in good running condition. I don't want to overlook something and get stuck with things I need to repair... etc. I hope you guys...
  19. 2018 ARP Long Beach Sprint Nationals

    2018 ARP Long Beach Sprint Nationals

    PREFACE This event recap is a difficult one for me to write. While I want to share the event and portray it as the amazing, fun and exciting event that it is, I write with a heavy heart as our friend Greg Duff lays in a hospital with very serious injuries sustained from an accident during heat...
  20. Halvecto

    Who new? Schiada 24

    Hustled down on-ramp to 5 South today; perfect timing to see this beaut. Likely coming from Teague? Still in rigging process. Capped. Pics don't show it well, but that is more a red than burgundy. Classic look. Fantastic boat. Anyone know more about this build?
Top